DVP-NC625, DVP-NC665P, HT-6600DP - Sony DVD Service Manual (repair manual). Page 16

1-6

Press X/x to select the setting that 
matches your TV type.

◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN 

(page 65)

◆ If you have a wide-screen TV or a 4:3 
standard TV with a wide-screen mode
• 16:9 (page 65)

The Setup Display for selecting the type 
of jack used to connect your amplifier 
(receiver) appears.

Press X/x to select the type of jack 
(if any) you are using to connect to 
an amplifier (receiver), then press 
ENTER.

Choose the item that matches the audio 
connection you selected on pages 20 to 
23 (

 through 

).

• If you connect just a TV and nothing 

else, select “NO.” Quick Setup is 
finished and connections are complete.

 

• Select “LINE OUTPUT L/R 

(AUDIO).” Quick Setup is finished and 
connections are complete.

• Select “DIGITAL OUTPUT.” The Setup 

Display for “DOLBY DIGITAL” appears.

Press X/x to select the type of 

Choose the signal that matches the audio 
connection you selected on pages 21 to 
23 (

 through 

).

 

• D-PCM (page 68)

• DOLBY DIGITAL (only if the 

amplifier (receiver) has a Dolby Digital 
decoder) (page 68)

“DTS” is selected.

Press X/x to select whether or 

Choose the item that matches the audio 
connection you selected on pages 21 to 
23 (

 through 

).

• OFF (page 68)

• ON (only if the amplifier (receiver) has 

a DTS decoder) (page 68)

Quick Setup is finished. All connections 
and setup operations are complete.

YES

NO

Is this player connected to an amplifier 
(receiver) ? Select the type of jack you 
are using.

LINE OUTPUT L/R (AUDIO)

DIGITAL OUTPUT

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:
DTS:

OFF

STANDARD

ON

DOWNMIX:

DOLBY SURROUND

DOLBY DIGITAL

D-PCM

D-PCM

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:
DTS:

OFF

STANDARD

ON

DOWNMIX:

DOLBY SURROUND

D-PCM

OFF
OFF

ON

c continued

To enjoy the surround sound effects of this 
player or your amplifier (receiver), set the 
following items as described below for the 
audio connection you selected on pages 21 to 
23 (

 through 

). Each of these is the 

default setting and does not need to be adjusted 
when you first connect the player. Refer to 
page 63 for using the Setup Display.

• No additional settings are needed.

• Set “DOWNMIX” to “DOLBY 

SURROUND” (page 68).

• If the sound distorts even when the volume 

is turned down, set “AUDIO ATT” to “ON” 
(page 67).

 

 

• Set “DOWNMIX” to “DOLBY 

SURROUND” (page 68).

• Set “DIGITAL OUT” to “ON” (page 68).

Depending on the DVD or VIDEO CD, some 
operations may be different or restricted.
Refer to the operating instructions supplied 
with your disc.

Press [/1.

The player turns on.

◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and 
select the appropriate channel so that you 
can hear sound from the player.

Press A on the player, and place a 
disc on the disc tray.

To place other discs on the tray, press 
DISC SKIP and place the discs in the 
order you want to play them.
Each time you press DISC SKIP, the disc 
tray turns so you can place the discs on 
the empty compartments. The player 
plays from the last disc placed on the tray.

Press H.

The disc tray closes, and the player starts 
playback (continuous play). Adjust the 
volume on the TV or the amplifier 
(receiver).
Depending on the disc, a menu may 
appear on the TV screen. For DVD 
VIDEOs, see page 31. For VIDEO CDs, 
see page 32.

To turn off the player
Press [/1. The player enters standby mode.

z

You can have the player turn off automatically 
whenever you leave it in stop mode for more than 
30 minutes. To turn on this function, set “AUTO 
POWER OFF” in “CUSTOM SETUP” to “ON” 
(page 66).

Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs, 

excessive noise will be heard from the 
analog stereo jacks. To avoid possible 
damage to the audio system, the consumer 
should take proper precautions when the 
analog stereo jacks of the player are 
connected to an amplification system. To 
enjoy DTS Digital Surround™ playback, an 
external 5.1-channel decoder system must 
be connected to the digital jack of the 
player.

With the playback 
side facing down

Disc 
compartment 
number

c continued

• Set the sound to “STEREO” using the 

AUDIO button when you play DTS sound 
tracks on a CD (page 49).

• Do not play DTS sound tracks without first 

connecting the player to an audio 
component having a built-in DTS decoder.

• The player outputs the DTS signal via the 

DIGITAL OUT (COAXIAL or OPTICAL) 
jack even if “DTS” in “AUDIO SETUP” is 
set to “OFF” in the Setup Display (page 68), 
and may affect your ears or cause your 
speakers to be damaged.

Notes on playing DTS sound tracks on a 
DVD
• DTS audio signals are output only through 

the DIGITAL OUT (COAXIAL or 
OPTICAL) jack.

• When you play a DVD VIDEO with DTS 

sound tracks, set “DTS” to “ON” in 
“AUDIO SETUP” (page 68).

• If you connect the player to audio 

equipment without a DTS decoder, do not 
set “DTS” to “ON” in “AUDIO SETUP” 
(page 68). A loud noise may come out from 
the speakers, affecting your ears or causing 
the speakers to be damaged.

* For DVD VIDEOs and DVD-RWs/DVD-Rs 

only.

**For DVD VIDEOs and DVD-RWs/DVD-Rs or 

DVD+RWs only.

z

• The Instant Replay function is useful when you 

want to review a scene or dialog that you missed.

• The Instant Search function is useful when you 

want to pass over a scene that you don’t want to 
watch.

• Before loading the discs, a disc number indicator 

of an empty compartment may be lit.

You may not be able to use the Replay function with 
some scenes.

Select a disc

Press DISC SELECT 
1–5 on the player

Stop

Press x

Pause

Press X

Resume play after 
pause

Press X or H

Go to the next disc

Press DISC SKIP

Go to the next chapter, 
track, or scene in 
continuous play mode

Press >

Go back to the 
previous chapter, 
track, or scene in 
continuous play mode

Press .

Stop play and remove 
the disc

Press Z

Replay the previous 
scene*

Press  
INSTANT REPLAY 
during playback

Briefly fast forward 
the current scene**

Press  
INSTANT SEARCH 
during playback

Check if a disc is in 
the disc compartment

Press LOAD on the 
player.
The disc number 
indicators on the front 
panel display (1–5) 
light up.