Read Sony DVP-NC60K / DVP-NC62K Service Manual online
2-6
DVP-NC60K/NC62K
2-9. OPTICAL PICK-UP
(DEVICE, OPTICAL KHM-310CAB/C2RP)
4
FMO-006 Flat Flexible Cable
(24P)
5
Optical Pick-Up
2
Four Insulator Screws
3
MD-109 Harness
(6P)
1
BU Holder
Note:
Solder short land before
remove the harness from
24 pin BU connector.
remove the harness from
24 pin BU connector.
Short Land Position
Caution Point on the Laser Diode:
Laser Diode in the optical Device is very sensitive to Surge
Current or ElectroStatic Discharge (ESD):
Laser Diode in the optical Device is very sensitive to Surge
Current or ElectroStatic Discharge (ESD):
After take-out FMO-006 Flexible cable from CN101 of
MV-045 board immediately ground FMO-006 Flexible cable
pattern using short clip. Metal paper clip can be used as
short clip.
MV-045 board immediately ground FMO-006 Flexible cable
pattern using short clip. Metal paper clip can be used as
short clip.
Click on the first or last page to see other DVP-NC60K / DVP-NC62K service manuals if exist.