DVP-NC600 - Sony DVD Service Manual (repair manual). Page 12

Connect the yellow plugs of the audio/video cord (supplied) to the yellow (video) jacks. You will 
enjoy standard quality images.

Use the red and white plugs to connect to the audio input jacks (page 20).

Connect the S VIDEO cord (not supplied). You will enjoy high quality images.

Connect the component via the COMPONENT VIDEO OUT jacks using component video cords 
(not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy 
accurate color reproduction and high quality images.

Do not connect your player to a VCR. You may not receive a clear image on the TV screen if you pass the player 
signals via the VCR.

A

B

C

Yellow (Video)

White (L)

Red (R)

Yellow (Video)

White (L)

Red (R)

VCR

CD/DVD player

TV

Connect directly.

Refer to the chart below to select the connection that best suits your system. The surround effects 
you will enjoy depend on the connections and components you use.

Select one of the following connections, 

 through 

. 

 * Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are 

trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights 
reserved.

**“DTS” is a registered trademark of Digital Theater Systems, Inc.

 (page 21)

• TV (stereo)

 (page 22)

• Stereo amplifier (receiver)

(having L and R audio input jacks only, or having a digital input jack)

• 2 speakers

(front L and R)

 (page 22)

• MD deck/DAT deck

 (page 24)

• AV amplifier (receiver) with a Dolby* Surround (Pro Logic) decoder 

(having L and R audio input jacks only, or having a digital input jack)

• 3 speakers

(front L and R, and rear (monaural))

• 6 speakers

(front L and R, center, rear L and R, subwoofer)

 (page 26)

• AV amplifier (receiver) having a Dolby Digital or DTS** decoder, and a digital 

input jack

• 6 speakers

(front L and R, center, rear L and R, subwoofer)

This connection will use your TV speakers for sound.

xRecommended surround sound effects for this connection.

• TVS DYNAMIC (page 50)

• TVS WIDE (page 50)

The yellow plug is used for video signals (page 18).

COAXIAL

DIGITAL OUT

PCM/DTS/
DOLBY DIGITAL

OPTICAL

S VIDEO

OUT

COMPONENT

VIDEO OUT

Y

P

B

1

2

P

R

LINE OUT

VIDEO

R – AUDIO – L

R – AUDIO – L

VIDEO

1

2

LINE OUT

TV

CD/DVD player

(white)

(red)

Audio/video cord 
(supplied)

(yellow)

to audio input

(yellow)

(white)

(red)

l

 : Signal flow

This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for 
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use 

. If the 

amplifier (receiver) has a digital input jack, use 

. When connecting to an MD deck or a DAT 

deck, use 

. In this case, connect the player directly to the MD deck or DAT deck without 

using your stereo amplifier (receiver).

xRecommended surround sound effects for the 

 connection only.

• TVS STANDARD (page 50)

z

In connection

 

, you can use the supplied audio/video cord instead of using a separate audio cord.

z

To realize better surround sound effects, make sure that your listening position is in between your speakers.

If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the 

 

connection.