Read Sony DVP-NC555ES Service Manual online
– 4 –
Align triangle mark of the chassis
with the groove of the gear (swing).
with the groove of the gear (swing).
Gear (swing)
Gear (swing)
Boss
Groove
C
B
A
Table Ass’y
Plate (guide)
Plate (guide)
Flexible flat cable
(FMS-18: CN002)
(FMS-18: CN002)
SERVICE NOTE
Fig. 1
Fig. 2
Fig. 4
Fig. 3
1.
NOTE ON REMOVING THE TABLE ASS’Y
1) Remove the two screws. (See Fig. 3)
2) Remove the two Plates (guide) in the direction of the arrows
A
and B.
3) Remove the Table ass’y in the direction of the arrow C.
4) Remove the Flexible flat cable (See Fig. 4).
4) Remove the Flexible flat cable (See Fig. 4).
2.
NOTE ON MOUNTING THE GEARS
1) Mount the gear (chuck). (See Fig. 5)
2) Rotate the gear (chuck) in the direction of the arrow. (down
2) Rotate the gear (chuck) in the direction of the arrow. (down
position) (See Fig. 5)
3) Connect the boss of the gear (swing) with the groove of the
rotary encoder and mount the gear (swing). (See Fig. 6)
4) Align triangle mark of the chassis with the groove of the gear
(swing).
Screw
(M2.6
(M2.6
×
8)
Screw
(M2.6
(M2.6
×
8)
Gear (chuck)
Click on the first or last page to see other DVP-NC555ES service manuals if exist.