Read Sony DVP-LS755P Service Manual online
1-5
22
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
Note
When connecting 6 speakers, replace the monaural
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
C
C-1
C-2
PROGRESSIVE
NORMAL
COMPONENT
VIDEO
VIDEO
OUT
TV
(RGB)
LINE
LINE OUT
VIDEO
S VIDEO OUT
CR
PB
/
Y
PR
/
CB
LINE OUT
AUDIO L
R
OPTICAL
PCM/
DTS/
MPEG/
DOLBY
DIGITAL
DTS/
MPEG/
DOLBY
DIGITAL
COAXIAL
DIGITAL OUT
C-1
C-2
OPTICAL
PCM/
DTS/
MPEG/
DOLBY
DIGITAL
DTS/
MPEG/
DOLBY
DIGITAL
COAXIAL
DIGITAL OUT
LINE OUT
AUDIO L
R
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Surround decoder
Centre
Rear (mono)
Stereo audio cord
(not supplied)
(not supplied)
[Speakers]
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
(red)
(white)
to coaxial or optical digital input
Coaxial digital cord
(not supplied)
(not supplied)
[Speakers]
or
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
l
: Signal flow
23
H
ook
up
s
s
Connecting to an AV amplifier (receiver) with a digital input jack, and a
decoder (Dolby Digital, MPEG audio or DTS), and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function
of your AV amplifier (receiver).
of your AV amplifier (receiver).
z Hint
Use connection
Use connection
when connecting to 7 or
more speakers (6.1 ch or more).
Notes
• After you have completed the connection, be sure
to set “DOLBY DIGITAL” to “DOLBY
DIGITAL” and “DTS” to “ON” in Quick Setup
(page 24). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” to
“MPEG” (page 71). Otherwise, no sound or a
loud noise will come from the speakers.
DIGITAL” and “DTS” to “ON” in Quick Setup
(page 24). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” to
“MPEG” (page 71). Otherwise, no sound or a
loud noise will come from the speakers.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set “DTS” to “ON” in Quick
Setup (page 24).
output through the LINE OUT L/R (AUDIO)
jacks, even if you set “DTS” to “ON” in Quick
Setup (page 24).
• When you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency, set
“48kHz/96kHz PCM” in “AUDIO SETUP” to
“96kHz/24bit” (page 71).
“48kHz/96kHz PCM” in “AUDIO SETUP” to
“96kHz/24bit” (page 71).
D
PROGRESSIVE
NORMAL
COMPONENT
VIDEO
VIDEO
OUT
TV
(RGB)
LINE
LINE OUT
VIDEO
S VIDEO OUT
CR
PB
/
Y
PR
/
CB
LINE OUT
AUDIO L
R
OPTICAL
PCM/
DTS/
MPEG/
DOLBY
DIGITAL
DTS/
MPEG/
DOLBY
DIGITAL
COAXIAL
DIGITAL OUT
D
OPTICAL
PCM/
DTS/
MPEG/
DOLBY
DIGITAL
DTS/
MPEG/
DOLBY
DIGITAL
COAXIAL
DIGITAL OUT
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
a decoder
Subwoofer
Centre
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
Coaxial digital cord
(not supplied)
(not supplied)
[Speakers]
CD/DVD player
l
: Signal flow
[Speakers]
Rear (L)
to optical digital input
or
to coaxial digital input
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
D
24
Step 5: Connecting the Mains Lead
Plug the player and TV mains lead (power cord) into a mains.
Step 6: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
To skip an adjustment, press >. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Press
[/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
player appears on the TV screen.
“Press [ENTER] to run QUICK SETUP”
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 66).
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 66).
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
language used in the on-screen display
appears.
5
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
subtitles in the selected language.
ENTER
"
/
1
.
/
>
X
/
x
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
MENU:
AUDIO:
SUBTITLE:
ITALIANO
ESPAÑOL
NEDERLANDS
DANSK
SVENSKA
FRANÇAIS
ENGLISH
ENGLISH
DEUTSCH
25
H
ook
up
s
s
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
aspect ratio of the TV to be connected
appears.
7
Press X/x to select the setting that
matches your TV type.
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 67)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
standard TV with a wide-screen mode
• 16:9 (page 67)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 67)
8
Press ENTER.
The Setup Display for selecting the type
of video signal output from the
COMPONENT VIDEO OUT jack
appears.
of video signal output from the
COMPONENT VIDEO OUT jack
appears.
If you intend to set “LINE” to “RGB” in
step 11, select “OFF.”
step 11, select “OFF.”
9
Press X/x to select if you wish to
receive progressive video signals
or not.
Select “ON” only if you have made video
connection A (page 16) and wish to
view progressive video signals.
connection A (page 16) and wish to
view progressive video signals.
10
Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
of video signal output from the LINE
(RGB)-TV jack appears.
11
Press X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
If you set “LINE” to “RGB,” you cannot
select “COMPONENT OUT.” (The
player outputs no component video
signals.)
◆ Video signals
• VIDEO (page 67)
◆ S video signals
• S-VIDEO (page 67)
◆ RGB signals
• RGB (page 67)
select “COMPONENT OUT.” (The
player outputs no component video
signals.)
◆ Video signals
• VIDEO (page 67)
◆ S video signals
• S-VIDEO (page 67)
◆ RGB signals
• RGB (page 67)
12
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
of jack used to connect your amplifier
(receiver) appears.
SCREEN SETUP
TV TYPE:
16:9
4:3 LETTER BOX
4:3 PAN SCAN
ON
AUTO
SCREEN SAVER:
BACKGROUND:
LINE:
COMPONENT OUT:
MODE
BACKGROUND:
LINE:
COMPONENT OUT:
MODE
(PROGRESSIVE)
:
16:9
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
SCREEN SAVER:
BACKGROUND:
16:9
ON
JACKET PICTURE
LINE:
ON
VIDEO
ON
OFF
COMPONENT OUT:
MODE
MODE
(PROGRESSIVE)
:
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
SCREEN SAVER:
BACKGROUND:
16:9
ON
JACKET PICTURE
LINE:
VIDEO
VIDEO
S-VIDEO
RGB
COMPONENT OUT:
MODE
MODE
(PROGRESSIVE)
:
YES
NO
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
(receiver) ? Select the type of jack you
are using.
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
,
continued
Click on the first or last page to see other DVP-LS755P service manuals if exist.