Read Sony DVP-LS500 Service Manual online
– 4 –
1) Remove the upper case from the set. (Refer to section 2-2)
2) Remove the MB-108 board. (Refer to section 2-8)
3) Set the MB-108 board and CK-122 board to the stand as shown
2) Remove the MB-108 board. (Refer to section 2-8)
3) Set the MB-108 board and CK-122 board to the stand as shown
in Fig. 3.
Fig. 3
1.
DISC REMOVAL PROCEDURE (at POWER OFF)
1) Open dust cover to access to a hole insert a tapering driver into the aperture of the unit bottom, and move the lever of chuck cam in the
direction of arrow A. (See Fig. 1)
2) Draw out the tray in the direction of arrow B, and remove a disc. (See Fig. 1)
Fig. 1
2.
HOW TO SERVICE MB-108 BOARD
• Jig
SERVICE NOTE
CK-120 board
(J-6090-127-A)
(J-6090-127-A)
CK-121 board
(J-6090-128-A)
(J-6090-128-A)
Harness 6P
(J-6090-126-A)
(J-6090-126-A)
CK-122 board
(J-6090-129-A)
(J-6090-129-A)
Flexible flat cables
FFC 26P J-6090-117-A
FFC 9P J-6090-118-A
FFC 5P J-6090-119-A
FFC 15P J-6090-121-A
FFC 25P J-6090-122-A
FFC 9P J-6090-118-A
FFC 5P J-6090-119-A
FFC 15P J-6090-121-A
FFC 25P J-6090-122-A
Stand
(J-6090-132-A)
(J-6090-132-A)
CK-122 board
Connector
(CN601)
(CN601)
Two screws
(B3)
(B3)
MB-108 board
Connector
(CN101)
(CN101)
Stand
B
A
Tray
The lever of chuck cam
Hole
Dust cover
Fig. 2
Click on the first or last page to see other DVP-LS500 service manuals if exist.