Read Sony DVP-K870P / DVP-K880P Service Manual online
1-5
21
Hookups
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
Note
When connecting 6 speakers, replace the monaural
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
C
C-1
C-2
NORMAL
PROGRESSIVE
PROGRESSIVE
S VIDEO OUT
COMPONENT VIDEO OUT
PB/CB
Y
PR/CR
LINE OUT
VIDEO
PCM/DTS/MPEG
DOLBY DIGITAL
OPTICAL
COAXIAL
DIGITAL OUT
LINE OUT
AUDIO
R
L
C-2
C-1
LINE OUT
AUDIO
R
L
PCM/DTS/MPEG
DOLBY DIGITAL
OPTICAL
COAXIAL
DIGITAL OUT
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
l
: Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Surround decoder
Centre
Rear (mono)
Stereo
audio cord (not
supplied)
audio cord (not
supplied)
[Speakers]
Coaxial digital cord
(not supplied)
(not supplied)
(red)
(white)
to coaxial or optical digital
input
input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
[Speakers]
or
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
,continued
22
Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function
of your AV amplifier (receiver).
of your AV amplifier (receiver).
z
Hint
Use connection
when connecting to 7 or
more speakers (6.1 ch or more).
Notes
• After you have completed the connection, be sure
to set “DOLBY DIGITAL” to “DOLBY
DIGITAL” and “DTS” to “ON” in Quick Setup
(page 24). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” to
DIGITAL” and “DTS” to “ON” in Quick Setup
(page 24). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” to
“MPEG” (page 74). Otherwise, no sound or a
loud noise will come from the speakers.
loud noise will come from the speakers.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set “DTS” to “ON” in Quick
Setup (page 24).
output through the LINE OUT L/R (AUDIO)
jacks, even if you set “DTS” to “ON” in Quick
Setup (page 24).
• When you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency, set
“48kHz/96kHz PCM” in “AUDIO SETUP” to
“96kHz/24bit” (page 72).
“48kHz/96kHz PCM” in “AUDIO SETUP” to
“96kHz/24bit” (page 72).
D
NORMAL
PROGRESSIVE
PROGRESSIVE
LINE OUT
AUDIO
R
L
S VIDEO OUT
COMPONENT VIDEO OUT
PB/CB
Y
PR/CR
LINE OUT
VIDEO
PCM/DTS/MPEG
DOLBY DIGITAL
OPTICAL
COAXIAL
DIGITAL OUT
D
PCM/DTS/MPEG
DOLBY DIGITAL
OPTICAL
COAXIAL
DIGITAL OUT
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
a decoder
Subwoofer
Centre
Coaxial digital cord
(not supplied)
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
[Speakers]
CD/DVD player
l
: Signal flow
[Speakers]
Rear (L)
to optical digital input
or
to coaxial digital input
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
D
23
Hookups
Step 5: Connecting the Power Cord
Plug the player and TV power cords (mains lead) into an AC outlet (mains).
Step 6: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press
To skip an adjustment, press
>. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Press
[
/
1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
TV so that the signal from the
player appears on the TV screen.
“Press [ENTER] to run QUICK SETUP”
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 69).
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 69).
4
Press ENTER without inserting a
disc.
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
language used in the on-screen display
appears.
5
Press
X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
here to display the menu and subtitles as
well.
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
aspect ratio of the TV to be connected
appears.
7
Press
X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 70)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
standard TV with a wide-screen mode
• 16:9 (page 70)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 70)
.
/
>
X
/
x
ENTER
[
/
1
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
MENU:
AUDIO:
SUBTITLE:
CHINESE1
ENGLISH
ENGLISH
ENGLISH
CHINESE2
THAI
SCREEN SETUP
TV TYPE:
COLOR SYSTEM:
SCREEN SAVER:
COLOR SYSTEM:
SCREEN SAVER:
16:9
4:3 LETTER BOX
BACKGROUND:
MODE
MODE
(PROGRESSIVE)
:
AUTO
4:3 PAN SCAN
16:9
,continued
24
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
of jack used to connect your amplifier
(receiver) appears.
9
Press
X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 19 to
22 (
connection you selected on pages 19 to
22 (
through
).
• If you connect just a TV and nothing
else, select “NO.” Quick Setup is
finished and connections are complete.
finished and connections are complete.
• Select “LINE OUTPUT L/R
(AUDIO).” Quick Setup is finished and
connections are complete.
connections are complete.
• Select “DIGITAL OUTPUT.” The Setup
Display for “DOLBY DIGITAL” appears.
10
Press
X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 20 to
22 (
connection you selected on pages 20 to
22 (
through
).
• D-PCM (page 73)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 73)
decoder) (page 73)
11
Press ENTER.
“DTS” is selected.
12
Press
X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 20 to
22 (
connection you selected on pages 20 to
22 (
through
).
• OFF (page 74)
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 74)
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 74).
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 74).
YES
NO
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
(receiver) ? Select the type of jack you
are using.
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
A
D
A
B-1
C-1
B-2
C-2
D
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
MPEG:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
DTS:
DOLBY DIGITAL
D-PCM
48kHz/96kHz PCM:
48kHz/16bit
B-2
C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
MPEG:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
PCM
DTS:
OFF
OFF
OFF
ON
48kHz/96kHz PCM:
B
D
B-2
C-2
D
Click on the first or last page to see other DVP-K870P / DVP-K880P service manuals if exist.