Read Sony DVP-K370 Service Manual online
—
5
—
SERVICE NOTE
1.
DISC REMOVAL PROCEDURE (at POWER OFF)
1)
Insert a driver into the aperture of the unit bottom, and move the lever of chuck cam in the direction of the arrow A. (See Fig. 1)
2)
Draw out the tray in the direction of the arrow B, and remove a disc. (See Fig. 1)
2.
HOW TO SERVICE MB-103 BOARD
•
Jig
1)
Remove the upper case from the set. (Refer to section 2-1)
2)
Remove the MB-103 board. (Refer to section 2-6)
3)
Set the MB-103 board in the stand (with CK-121 board) as
shown in Fig. 2.
shown in Fig. 2.
Fig. 1.
Fig. 2.
B
A
Aperture
Lever of chuck cam
Tray
FFC 26P J-6090-117-A,
FFC 9P J-6090-118-A,
FFC 5P J-6090-119-A,
FFC 15P J-6090-121-A,
FFC 25P J-6090-122-A
FFC 9P J-6090-118-A,
FFC 5P J-6090-119-A,
FFC 15P J-6090-121-A,
FFC 25P J-6090-122-A
Harness 6P (J-6090-126-A)
CK-120 board
(J-6090-127-A)
(J-6090-127-A)
CK-122 board
(J-6090-129-A)
(J-6090-129-A)
Stand
(CK-121 board)
(J-6090-132-A)
(CK-121 board)
(J-6090-132-A)
Five flexible flat cables
3
Connector (CN101)
5
Connector (CN601)
2
Stand
(with CK-121 board)
1
MB-103 board
6
CK-122 board
4
Two tapping
screws (3 x 6)
Click on the first or last page to see other DVP-K370 service manuals if exist.