Read Sony DVP-K370 (serv.man2) Service Manual online
1-5
20
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
* Manufactured under license from Dolby
Laboratories. “ Dolby,” “ Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
double-D symbol are trademarks of Dolby
Laboratories.
** “ DTS” and “ DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected
Connection
Your setup
TV
• Surround effects: TVS DYNAMIC (page 52),
• Surround effects: TVS DYNAMIC (page 52),
TVS WIDE (page 52)
(page 21)
example
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 52)
or
MD deck/DAT deck
• Surround effects: none
• Surround effects: TVS STANDARD (page 52)
or
MD deck/DAT deck
• Surround effects: none
(page 22)
example
AV amplifier (receiver) having a Dolby
*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 74)
(page 23)
example
AV amplifier (receiver) with a digital input jack
having a Dolby Digital, MPEG audio, or DTS
having a Dolby Digital, MPEG audio, or DTS
**
decoder and 6 speakers
• Surround effects: Dolby Digital (5.1ch) (page 74),
• Surround effects: Dolby Digital (5.1ch) (page 74),
DTS (5.1ch) (page 74), MPEG audio (5.1 ch)
(page 74)
(page 74)
(page 24)
example
A
D
A
B
C
D
21
H
ook
up
s
s
Connecting to your TV
This connection will use your TV speakers for sound.
* The yellow plug is used for video signals (page
18).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) 1/2 jacks to the TV’s
audio input jack.
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) 1/2 jacks to the TV’s
audio input jack.
A
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
R
1
2
L
AUDIO
VIDEO
DIGITAL OUT
LINE OUT
S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
CB
CR
R
1
2
L
AUDIO
VIDEO
LINE OUT
A
TV
l : Signal flow
CD/DVD player
(white)
(red)
Audio/video
cord (supplied)
cord (supplied)
to audio input
(yellow)
(white)
(red)
(yellow)*
to LINE OUT L/R
(AUDIO) 1 or 2
(AUDIO) 1 or 2
,continued
22
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
.
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
your stereo amplifier (receiver).
z Hint
In connection
In connection
, you can use the supplied
audio/video cord instead of using a separate stereo
audio cord.
audio cord.
Note
If you select one of the TVS effects (page 51) while
playing a disc, no sound will come from your
speakers with the
playing a disc, no sound will come from your
speakers with the
connection.
B
B-1
B-2
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
R
1
2
L
AUDIO
VIDEO
DIGITAL OUT
LINE OUT
S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
CB
CR
B-2
B-1
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO
VIDEO
LINE OUT
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Coaxial digital
cord (not supplied)
cord (not supplied)
Stereo audio cord
(not supplied)
(not supplied)
to audio input
to coaxial or optical
digital input
digital input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
or
to LINE OUT L/R (AUDIO) 1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
l: Signal flow
B-1
B-2
23
H
ook
up
s
s
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
Note
When connecting 6 speakers, replace the monaural
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.
C
C-1
C-2
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
R
1
2
L
AUDIO
VIDEO
DIGITAL OUT
LINE OUT
S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
CB
CR
C-2
C-1
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO
VIDEO
LINE OUT
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
l: Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Surround decoder
Center
Rear (mono)
Stereo
audio cord (not
supplied)
audio cord (not
supplied)
[Speakers]
Coaxial digital cord
(not supplied)
(not supplied)
(red)
(white)
to coaxial or optical digital
input
input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
[Speakers]
or
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO) 1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
,continued
Click on the first or last page to see other DVP-K370 (serv.man2) service manuals if exist.