DVP-FX815 (serv.man2) - Sony DVD Service Manual (repair manual). Page 12

Read Sony DVP-FX815 (serv.man2) Service Manual online

1-8
16.  STOP  button  (page  26)
17.  MENU  button  (page  29)
Use  the  MENU  button  to  display  the  menu  screen 
included  on  a  DVD  disc.
To  operate  a  menu  screen,  follow  the  instructions 
in  “Using  a  DVD  Menu”.
18.  PAUSE  button  (page  26)
19.        /        /        /        button,  ENTER  button
(Left,  up,  down,  right)  for  use  in  highlighting  a 
selection  on  a  GUI  menu  screen,  TOP  MENU  and 
MENU  screen.
When  playing  a  DVD,  the        /        buttons  on  the  unit 
perform  as  SCAN/SLOW  buttons,  and  the  ENTER 
button  on  the  unit  performs  as  the  PLAY  button.
NOTE:
When  playing  some  DVDs,  the        /        buttons  on  the 
unit  may  not  function.  Use  the        /        buttons  on  the 
remote  instead.
20.  RETURN  button
Use  the  remote  in  front  of  the  remote  sensor.
Do  not  drop  or  hit  the  remote.
Do  not  leave  the  remote  in  an  extremely  hot  or 
humid  place.
Do  not  expose  the  remote  to  water  or  set  it  on  top 
of  something  wet.
Do  not  disassemble  the  remote.
Use  the  RETURN  button  to  return  from  the  menus 
of  Display,  Setup  or  LCD  Mode.
*TOP  MENU  button:
Use  the  TOP  MENU  button  to  display  the  title 
screen  included  on  DVD  video  discs  (page  29).
About  the  Remote
18 
Identification  of  Controls  (continued)
LCD  Panel
Features  of  Revolving  LCD  panel
You  can  revolve  the  LCD  panel  of  this  player 
clockwise  a  maximum  of  180°  for  use.  You  can  also 
operate  the  player  after  revolving  the  LCD  panel  180° 
and  folding  it  back  down.
Revolving  the  LCD  panel
1.  Place  the  unit  on  a  stable  and  even  surface  such  as 
on  a  table.
2.  Push  the  LCD  panel  up  using  your  thumbs  and  then 
lift  it  into  a  vertical  position.  (Refer  to  Picture  1.)
3.  Revolve  the  LCD  panel  clockwise  slowly  180°  until 
it  clicks.  (Refer  to  Picture  2.)
TIPS:
Do  not  revolve  the  LCD  panel  if  it  is  not  fully 
opened,  as  it  may  become  scratched.
Do  not  revolve  the  LCD  panel  more  than  180°  or 
in  the  opposite  direction  as  shown  below.  Doing 
so  may  damage  the  LCD  panel.
Picture  1
Picture  2
Picture  3
Folding  the  LCD  panel  after  revolving  it
Press  the  LCD  panel  down  to  the  top  of  the  unit 
after  revolving  it  clockwise  180°.  In  this  position, 
the  panel  faces  up  word.  (Refer  to  Picture  3.)
Revolving  the  LCD  panel  to  its  original  position
1.  Open  the  LCD  panel  to  a  vertical  position.
2.  Revolve  the  LCD  panel  counterclockwise  slowly 
180°  until  it  clicks.
When  finished  using  the  player,  return  the  LCD 
panel  to  its  original  position.
Do  not  leave  the  LCD  panel  in  the  face-up 
position,  or  sudden  shocks  may  damage  it.
TIPS:
19 
Identification  of  Controls  (continued)
Introduction
Page of 73
Display

Click on the first or last page to see other DVP-FX815 (serv.man2) service manuals if exist.