DVP-FX810 - Sony DVD Service Manual (repair manual). Page 14

Read Sony DVP-FX810 Service Manual online

1-10
Using  with  Batteries  (continued)
Charging  the  Battery  Pack
Charging  the  Battery  Pack
1.    Attach  the  battery  pack.
2.    Connect  the  AC  adaptor,  and  then  plug  it  into  an  AC  outlet.
Player  (Main  Body)
Player  (Main  Body) Battery  Pack
Battery  Pack
Charge  Indicator
Charge  Indicator
3.  When  charging  begins,  the  indicator  light  turns  on.
4.    When  charging  ends,  the  indicator  light  turns  off.
5.    After  charging  is  finished,  remove  the  AC  adaptor  and 
          disconnect  the  electrical  cord  from  the  outlet.
Checking  the  Battery  Reserve  Level
Checking  the  Battery  Reserve  Level
Recharge
Charging  Time  and  Playing  Time
Charging  Time  and  Playing  Time
Recharging  (Power  Off)
With  player
Approx.
5  hours  and  30  minutes
For  the  following  conditions,  the  longest  incidence  of 
continuous  playback  is  at  normal  temperature  (20°C).
Battery  condition  may  reduce  operating  time.
      -Headphone  Use
      -Set  Backlight  Adjustment  to  the  Minimum
Playing  Time  (DVD-
)
  On
Approx.
6  hours*
VIDEO
LCD
Notes:
When  the  player  is  stopped,  the  battery  mark  is  displayed 
on  the  LCD  screen.  When  [                          ]  is  displayed  or  the 
charge  indicator  flashes,  please  recharge  the  battery.
It  is  recommended  to  charge  up  to  the  maximum  when  the 
surrounding  temperature  is  in  the  10-30°C  range.
The  battery  has  a  limited  span  of  use.  With  constant  use 
and  the  passage  of  time,  the  battery's  capacity  will 
gradually  diminish.  If  the  playing  time  of  the  battery 
shortens  considerably,  please  understand  that  it  has 
passed  its  span  of  usage  and  purchase  a  new  one.
The  battery  mark  is  not  displayed  on  the  LCD  screen 
when  the  AC  adaptor  or  input  line  is  being  used.
Charging  times  may  differ  from  that  indicated  above  due 
to  conditions  of  use,  environment,  and  other  factors. 
Full
The  battery  mark  is  not  displayed  when  a  DVD  or  JPEG 
files  are  being  played.  Stop  the  player  and  check  the 
battery  reserve  level.
AC  Adaptor  Input  Jack
[DC  IN  9.5V]
AC  Adaptor  Input  Jack
I
[DC  N  9.5V]
Low
22 
-  Connect  the  AC  adaptor  or  install  the  battery  pack.
When  the  Menu  Screen  is  Displayed
Depending  on  the  disc,  the  menu  screen  may  be  displayed.
Playing  Discs
Notes:
Th e  size  of  the  imag e  displayed  on  the  LCD  screen  can  be 
adjusted  by  pressing  the  [LCD  MODE]   button.
Since  this  player  has  been  equipped  with  Viewer 
Restrictions  (i.e.  Parental  Control),  a  password  must  be 
entered  to  play  a  viewer  restricted  disc.
For  further  details,  please  refer  to  the  parental  control 
on  pages  45-46.
DVD  discs  are  equipped  with  region  codes.
This  player  can  paly  discs  with 
2
  or 
ALL
  region  code.
Please  slide  the  LINE  SELECT  IN/OUT  switch  to  OUT,  or  the 
player  may  not  work.
Minimum  Volume        Maximum  Volume
Playing  Discs
1.  Open  the  LCD  panel.
2.  Slide  the  POWER  switch  of  the  main  body  to  the  right  (ON  position) 
        to  turn  power  on.  The  power  indicator  light  will  turn  green.
3.  Slide  the  OPEN  knob  to  the  left  and  open  the  disc  lid.
4.  Insert  the  disc  to  be  played
5.  Push  the  [PUSH  CLOSE]  tab  to  shut  the  disc 
. 
    ・If  the  disc  is  inserted 
label-side  down,  a  “No  Disc”  or 
“Check  Disc”  message  will  be  displayed.
6.  Press  PLAY   to  begin  playing  the  disc.
  ・The  player  may  start 
automatically  by  itself. 
    ・After  all  titles  have  been  played,  the  player  will  stop  itself  and 
        the  display  will  return  to  the  menu  screen.
7.  Adjust  sound  volume.
  ・Adjust  to  the  preferred  sound  level  using  the  [VOLUME]  knob 
        on  the  right  side  of  the  player.
  with  the  label-side  up.
lid
with 
       
[
]
playing 
Remove  disc  after  use,  slide  the  [POWER]  switch  to  the 
right,  and  turn  off  the  power.
23 
For  further  details,  please  refer  to  the  jacket  of  the  disc  to 
be  played.
With          /        /        /          choose  an  option  and  press  [ENTER],  or 
push  the  number  to  choose  an  option.
B
asic
 Os
perati
on
Page of 73
Display

Click on the first or last page to see other DVP-FX810 service manuals if exist.