Read Sony DVP-FX1021 Service Manual online
1-10
Introductions
23
Power Connections (continued)
A
Charging the battery pack
1. Attach the battery pack to the player.
2. Connect the AC power adaptor to the player and
2. Connect the AC power adaptor to the player and
then plug into an AC outlet.
When charging starts, “
” appears on the
display window.
3. Disconnect the AC power adaptor from the player
and pull out the plug from the AC outlet after
charging.
When charging is complete, “
charging.
When charging is complete, “
” appears on
the display window.
A
Confirm the battery charge on the unit’s display
window
• If using the AC adaptor, battery display does not
appear.
A
Recharging and play times
* When Brightness control is set to “
b
”(minimum).
NOTES:
• Recharging times shown above depend on operating
conditions.
• When the power is ON, you cannot charge the
battery.
• Charge the battery at a temperature of +5°C (+41°F)
to +35°C (+95°F).
The charging time may vary, depending on the
surrounding temperature.
The charging time may vary, depending on the
surrounding temperature.
• The battery will not be charged when it is naturally or
purposely discharged. Because the unit cannot
perceive battery voltage, even if you attached the
battery.
When you are in this situation, power on the unit and
then power off again. Then battery charging will
proceed.
perceive battery voltage, even if you attached the
battery.
When you are in this situation, power on the unit and
then power off again. Then battery charging will
proceed.
V O L U M
E
P H O N E
S
P H O N E
S
A U D I O
V I D E O
LINE SE
LECT
IN
OUT
POWER /HOLD
Player
AC adaptor cord insert
jack (DC IN 9.8V)
jack (DC IN 9.8V)
Recharging
Play time
with player
LCD On
Approx.
Approx.
4.8 hours
7 hours*
Full
Low
Recharge
Charge indicator
Battery Pack
Playing a Disc
- Prepare the power supply.
1. Open the outer cover and slide the POWER
switch to the left to turn the unit on.
Indicator lights and then the indicator will disappear after
5 seconds.
5 seconds.
2. Press OPEN to open the disc lid and insert a disc
onto the side you want to play, label up. Close the
disc lid by hand.
•
disc lid by hand.
•
If the disc is placed in upside down (and it is a single-
sided disc), “NO DISC” or “Disc Error” appears on the
LCD screen.
sided disc), “NO DISC” or “Disc Error” appears on the
LCD screen.
3. Press PLAY to start play.
• After playing back all of the chapters in the title, the
DVD player automatically stops and returns to the
menu screen.
menu screen.
4. Adjust the volume.
• Reduce the volume before playback, then gradually
increase it.
After operation
When the unit is not in use, remove the disc and slide the
POWER switch to the left and hold it there to turn off the
DVD player.
POWER switch to the left and hold it there to turn off the
DVD player.
When a menu screen appears on the LCD
screen.
screen.
In case of interactive DVDs with control,
a menu screen appears on the LCD screen.
a menu screen appears on the LCD screen.
Press
B
/
V
/
v
/
b
and press ENTER, or press the number
buttons, to select the desired item.
Playback of the selected item begins.
For further information, also refer to the jacket or case of
the disc you are playing.
the disc you are playing.
Use the number buttons to select the track you want to
view and press RETURN to return to the menu screen.
Menu settings and operating procedures may differ. Follow
the instructions on the each menu screen. You also may
set PBC to Off (See “PBC” on page 45).
view and press RETURN to return to the menu screen.
Menu settings and operating procedures may differ. Follow
the instructions on the each menu screen. You also may
set PBC to Off (See “PBC” on page 45).
VCD
DVD
24
Basic Playback
1
2
3
4
LCD MODE
COLOR/BRIGHT
V O L U M E
D o w n
U p
Click on the first or last page to see other DVP-FX1021 service manuals if exist.