DVP-F21 - Sony DVD Service Manual (repair manual). Page 10

Read Sony DVP-F21 Service Manual online

1-7
30
Step 3: Attaching the Jack Cover
You can install the player horizontally, vertically or on the wall.
Notes
• Make sure that the connecting cords are not trapped by the jack cover.
• If you use commercially available cords, make sure that those cords are similar to the supplied cords in size. If the 
cords are too thick or hard, or the plug is too large, you may not be able to attach the jack cover securely.
When you install the player horizontally
First, gather all the connecting cords together and let them pass through the side of the player.
Then attach the jack cover carefully not to trap the cords.
When you install the player vertically
First, gather all the connecting cords together and let them pass through the side of the player.
Then attach the jack cover for vertical installation (supplied) carefully not to trap the cords.
Notes
• When you place the player in a horizontal position, remove the jack cover for vertical installation.
• To move the player, hold the player itself. If you hold the flat part of the jack cover for vertical installation, it may 
break.
• Do not place the player in a vertical position without attaching the jack cover for vertical installation. If you do not 
attach it, the player will be unstable and may fall over.
31
Hookups
When you install the player on the wall
When you install the player on the wall, ask a qualified installer to do the job. The player should 
be installed in the following way.
Attach the jack cover as in the same way for the horizontal installation. 
Fasten screws (not supplied) to the wall at the same height 3 1/4 in. (80 mm) apart. The screws 
should protrude by 3/16 to 7/32 in. (4 to 5 mm).
Remove the seals covering the hanging holes. Hang the player on the screws. Push the player 
tightly against the wall.
Note
When you disconnect or connect the cords, take the player down from the wall.
Step 4: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Do not connect the power cord of your player to the “switched” power socket of an amplifier 
(receiver). Otherwise, when you turn off the power of your amplifier (receiver), the settings for 
the player may be lost.
3 1/4 in.
3/16 - 7/32 in.
32
Step 5: Quick Setup
Follow the steps below to make the minimum number of basic adjustments to use the player. To 
skip an adjustment press 
>, to return to the previous adjustment, press ..
Turn on the TV.
Switch the input selector on the TV to the player.
Press 
?/1
 on the player or the remote.
“Press [ENTER] to run QUICK SETUP.” appears at the bottom of the screen. If this message 
does not appear, select “QUICK” under “SETUP” in the Control Menu (page 66) to run Quick 
Setup.
Press ENTER without inserting a disc.
The Setup Display for selecting the language used in the on-screen display appears.
Press X/x to select a language.
The player uses the language selected here to display the menu and subtitles as well. 
?
/
1
./>
X
/
x
ENTER
?
/
1
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
FRENCH
ENGLISH
ENGLISH
SPANISH
PORTUGUESE
33
Hookups
Press ENTER.
The Setup Display for selecting the aspect ratio of the TV to be connected appears.
Press X/x to select the item.
Press ENTER.
The Setup Display for selecting the type of jack used to connect your amplifier (receiver) 
appears.
Press X/x to select the item, then press ENTER.
• When “NO” or “AUDIO OUTPUT L/R” is selected, Quick Setup is finished and connections 
are complete.
• When “DIGITAL OUTPUT” is selected, the Setup Display for “DOLBY DIGITAL” 
appears. Proceed to Step 0.
TV Type
You select
Page
4:3 standard TV
4:3 LETTER BOX or 4:3 
PAN SCAN
68
A wide-screen TV or 4:3 standard TV with the 
wide-screen mode
16:9
68
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 PAN SCAN
4:3 LETTER BOX
16:9
4:3 LETTER BOX
YES
NO
Is this player connected to an amplifier 
(receiver) ? Select the type of jack you 
are using.
AUDIO OUTPUT L/R
DIGITAL OUTPUT
continued 
Page of 88
Display

Click on the first or last page to see other DVP-F21 service manuals if exist.