Read Sony DVP-F11 (serv.man3) Service Manual online
- 10 -
2
2
2
2
2
Disc OUT
Push the eject button.
Loading motor rotates in the direction of the arrow. (Fig. 2.7)
SW-3 turns ON by lever (centering R). (Fig. 2.6)
Loading motor stops.
Chucking arm moves up by cam of cam slider, and take off the chuck plate. (Fig. 2.9)
Cam slider moves in the direction of the arrow via worm gear, worm wheel, gear (LD
A), gear (LD B) and rack of cam slider. (Fig. 2.7, 2.9)
A), gear (LD B) and rack of cam slider. (Fig. 2.7, 2.9)
Lever (trigger B) comes back by power of spring, and lever (trigger A) holds a disc.
Shaft of lever (centering L/R) assy supports a disc. (Fig. 2.10)
Shaft of lever (centering L/R) assy supports a disc. (Fig. 2.10)
* At this time, roller rotates in the direction
of the arrow via worm gear, motor pulley,
roller pulley, gear (roller A), gear (roller B)
and gear (roller). (Fig. 2.8, 2.9)
roller pulley, gear (roller A), gear (roller B)
and gear (roller). (Fig. 2.8, 2.9)
When pull up disc by hand, lever (centering) assy comes back to original
position. (Fig. 2.11)
position. (Fig. 2.11)
Shaft (down) of roller arm assy comes back by power of spring.
Disc moves up by roller arm assy, and it OUT by rotation of roller.
Disc moves up by roller arm assy, and it OUT by rotation of roller.
Click on the first or last page to see other DVP-F11 (serv.man3) service manuals if exist.