Read Sony DVP-CX850D (serv.man3) Service Manual online
— 6 —
7-7. DISC PULLY ADJUSTMENT AND CHECK
Disc
Holder (disc A)
Note: The disc must not be
fixed and stationary.
fixed and stationary.
Flat head (–) screwdriver
Disc pully
Disc hole
A
B
Fixing screw
Pully assembly
3
Remove the pully assembly.
• Loose the fixing screw at 60!! to 90!! and move the attachment plate
(BU adjustment) up and down using the flat head (–) screwdriver so
that the relationship of the position between the disc hole and disc pully
is 3:2 to 2:3.
(BU adjustment) up and down using the flat head (–) screwdriver so
that the relationship of the position between the disc hole and disc pully
is 3:2 to 2:3.
• After adjusting as shown below, rotate the cam
counterclockwise once and rotate the cam clockwise
to confirm that A:B is 3:2 to 2:3.
counterclockwise once and rotate the cam clockwise
to confirm that A:B is 3:2 to 2:3.
Cam
1
Rotate the cam until the cam
comes to the position as
shown in the illustration so
that the cam is aligned.
shown in the illustration so
that the cam is aligned.
Cam
2
Confirm the position as shown
in the illustration is established.
0.5–2mm
Base unit
Base unit
Attachment plate
(BU adjustment)
(BU adjustment)
Magnet assembly
Attachment plate
(BU adjustment)
(BU adjustment)
Click on the first or last page to see other DVP-CX850D (serv.man3) service manuals if exist.