Read Sony DVP-CX850D (serv.man2) Service Manual online
1-2
8
Getting Started
5.1CH OUTPUT
L
FRONT
REAR CENTER
R – AUDIO – L
OPTICAL COAXIAL
PCM/MPEG/DTS/
DOLBY DIGITAL(AC-3)
VIDEO
WOOFER
LINE OUTPUT
T
EURO AV 1 (RGB) - TV
DIGITAL OUTPUT MEGA
CONTROL
S VIDEO
OUTPUT
AUDIO
INPUT
R
L
R
i
EURO AV 2
TV Hookups
CD/DVD player
To
Ú EURO
AV1 (RGB)-TV
To an AC outlet
: Signal flow
This connection is for listening to the sound through TV
speakers (2ch – L, R). Refer to the instructions supplied
with the component to be connected. You cannot connect
this player to a TV without an EURO AV (SCART)
connector or a video input connector.
speakers (2ch – L, R). Refer to the instructions supplied
with the component to be connected. You cannot connect
this player to a TV without an EURO AV (SCART)
connector or a video input connector.
Required cords
EURO-AV (SCART) connecting cord (not supplied) (2)
Be sure to make connections firmly to avoid hum and noise.
Refer to the instructions supplied with the TV to be connected.
Be sure to make connections firmly to avoid hum and noise.
Refer to the instructions supplied with the TV to be connected.
TV
Notes
• When you set “EURO AV OUT” to “S VIDEO” or “RGB” under
• When you set “EURO AV OUT” to “S VIDEO” or “RGB” under
“CUSTOM SETUP” in the setup display, use the EURO AV
(SCART) connecting cord conformed to each signal.
(SCART) connecting cord conformed to each signal.
• When you connect using the EURO-AV connecting cord,
confirm that the TV corresponds to S VIDEO or RGB. Refer to
the instructions supplied with the TV to be connected.
the instructions supplied with the TV to be connected.
To EURO AV
(SCART) output
(SCART) output
To
: EURO
AV2
To EURO AV
(SCART) input
(SCART) input
VCR
9
Getting Started
R – AUDIO – L
VIDEO
LINE OUTPUT
S VIDEO
OUTPUT
INPUT
S VIDEO IN
AUDIO
R
L
EURO AV 1 (RGB) – TV
EURO AV 2
EURO AV
EURO AV
EURO AV
Yellow
White (L)
Red (R)
White (L)
Red (R)
Audio/Video connecting cord (supplied)
S video cord (supplied)
Yellow
White (L)
Red (R)
White (L)
Red (R)
CD/DVD player
TV
If your TV has no EURO AV (SCART) connectors
You can connect the player to a TV (with audio/video input
jacks) using the supplied audio/video connecting cord. If your
TV has an S video input connector, connect the component via
the S VIDEO OUTPUT connector using the S video cord
(supplied) instead of the video connecting cord. You will get a
better picture. When connecting the cords, be sure to match the
color-coded cord to the appropriate jacks on the components:
Yellow (video) to Yellow, Red (right) to Red and White (left) to
White.
jacks) using the supplied audio/video connecting cord. If your
TV has an S video input connector, connect the component via
the S VIDEO OUTPUT connector using the S video cord
(supplied) instead of the video connecting cord. You will get a
better picture. When connecting the cords, be sure to match the
color-coded cord to the appropriate jacks on the components:
Yellow (video) to Yellow, Red (right) to Red and White (left) to
White.
pTo listen to the sound through TV speakers
pIf your TV has no S video input connector
Connect the component via the VIDEO INPUT connector using
the video connecting cord (not supplied) instead of the S video
cord.
Connect the component via the VIDEO INPUT connector using
the video connecting cord (not supplied) instead of the S video
cord.
CD/DVD player
TV
Video connecting cord (not supplied)
If your TV has two EURO AV (SCART) connectors
To EURO AV 1
(SCART) input
(SCART) input
To EURO AV 2
(SCART) input
(SCART) input
CD/DVD player
VCR
TV
R – AUDIO – L
VIDEO
LINE OUTPUT
INPUT
10
Getting Started
Notes
• Refer to the instructions supplied with the component to be
• Refer to the instructions supplied with the component to be
connected.
• Do not connect this player to a video deck. If you view the
pictures on your TV after making the connections shown
below, a picture noise may appear.
below, a picture noise may appear.
• Depending on the TV or receiver (amplifier), sound distortion
may occur because the audio output level is high. In this case,
set “AUDIO ATT” in “AUDIO SETUP” to “ON” in the setup
display. For details, see page 66.
set “AUDIO ATT” in “AUDIO SETUP” to “ON” in the setup
display. For details, see page 66.
• If you cannot view the pictures from a VCR through this player
which is connected to a TV with RGB, set
to
…(Audio/
Video) on your TV. When you select
(RGB), the TV cannot
receive the signal from the VCR.
• If you want to use SmartLink function of a VCR, connect the
VCR to a TV with the connector conformed to SmartLink
function and connect the CD/DVD player to the TV with
another connector.
function and connect the CD/DVD player to the TV with
another connector.
Connect
directly.
directly.
VCR
TV
CD/DVD
player
player
Setups for the player
Some setups are necessary for the player depending on
the TV or other components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 57.
the TV or other components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 57.
• To connect the player to a wide-screen TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to “16:9” (default setting). For details, see
page 61.
SETUP” to “16:9” (default setting). For details, see
page 61.
• To connect the player to a normal TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to “4:3 LETTER BOX” or “4:3 PAN SCAN.”
For details, see page 61.
SETUP” to “4:3 LETTER BOX” or “4:3 PAN SCAN.”
For details, see page 61.
• To connect the player to a TV or VCR via EURO AV
connector that conforms to the S video signals or
RGB signals
In the setup display, set “EURO AV OUT” in “CUSTOM
SETUP” to “S VIDEO” or “RGB.” For details, see page
62.
RGB signals
In the setup display, set “EURO AV OUT” in “CUSTOM
SETUP” to “S VIDEO” or “RGB.” For details, see page
62.
This player conforms to the PAL color system.
When you play a disc recorded in the NTSC
color system, the player outputs the video
signal or the setup display etc. in the NTSC
color system and the picture may not appear
on the TV screen. In this case, open the front
cover and remove the disc.
When you play a disc recorded in the NTSC
color system, the player outputs the video
signal or the setup display etc. in the NTSC
color system and the picture may not appear
on the TV screen. In this case, open the front
cover and remove the disc.
TV Hookups
11
Getting Started
5.1CH OUTPUT
L
FRONT
REAR CENTER
R – AUDIO – L
OPTICAL COAXIAL
PCM/MPEG/DTS/
DOLBY DIGITAL(AC-3)
VIDEO
WOOFER
LINE OUTPUT
T
EURO AV 1 (RGB) - TV
DIGITAL OUTPUT MEGA
CONTROL
S VIDEO
OUTPUT
AUDIO
INPUT
R
L
R
i
EURO AV 2
S VIDEO
VIDEO
AUDIO
INPUT
L
R
CD
L
R
Receiver (Amplifier) Hookups
This connection is for listening to the sound through
speakers connected to a receiver (amplifier such as an
integrated stereo amplifier, a receiver having a built-in
Dolby Pro Logic decoder, etc.). Refer to the instructions
supplied with the component to be connected.
You can enjoy 5.1 channel surround sound by connecting
a receiver (amplifier) with 5.1 channel inputs. See page
50.
speakers connected to a receiver (amplifier such as an
integrated stereo amplifier, a receiver having a built-in
Dolby Pro Logic decoder, etc.). Refer to the instructions
supplied with the component to be connected.
You can enjoy 5.1 channel surround sound by connecting
a receiver (amplifier) with 5.1 channel inputs. See page
50.
z
You can enjoy surround when connecting front speakers only
You can use 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using actual
rear speakers (VES: Virtual Enhanced Surround). For details, see
page 50.
from the sound of the front speakers (L, R) without using actual
rear speakers (VES: Virtual Enhanced Surround). For details, see
page 50.
Required cords
Audio connecting cord (not supplied) (1)
S video cord (supplied) (1)
When connecting the cords, be sure to match the color-coded
cord to the appropriate jacks on the components: Red (right) to
Red and White (left) to White. Be sure to make connections firmly
to avoid hum and noise.
S video cord (supplied) (1)
When connecting the cords, be sure to match the color-coded
cord to the appropriate jacks on the components: Red (right) to
Red and White (left) to White. Be sure to make connections firmly
to avoid hum and noise.
White (L)
Red (R)
White (L)
Red (R)
CD/DVD player
To
AUDIO
OUTPUT
AUDIO
OUTPUT
TV
To audio input
: Signal flow
Receiver (Amplifier)
To an AC outlet
To S VIDEO
OUTPUT
OUTPUT
To S VIDEO input
Note
You cannot enjoy the picture with S video signal if your TV is not conformed to the S video signal. When
your TV does not have S VIDEO input, connect the component via the VIDEO INPUT connector using the
video connecting cord (not supplied) instead of the S video cord. For details, see page 9.
Refer to the instructions supplied with your TV.
You cannot enjoy the picture with S video signal if your TV is not conformed to the S video signal. When
your TV does not have S VIDEO input, connect the component via the VIDEO INPUT connector using the
video connecting cord (not supplied) instead of the S video cord. For details, see page 9.
Refer to the instructions supplied with your TV.
Click on the first or last page to see other DVP-CX850D (serv.man2) service manuals if exist.