Read Sony DVP-C650D / DVP-C653D Service Manual online
– 4 –
SERVICE NOTE
1.
DISASSEMBLY
• This set can be disassembled in the order shown below.
2.
NOTE ON REMOVE THE CASE
1) Remove seven tapping screws. (See Fig. 1)
2) Open the side of case. (See Fig. 1)
3) Remove the case as lift straight. (See Fig. 1)
2) Open the side of case. (See Fig. 1)
3) Remove the case as lift straight. (See Fig. 1)
Set
Case
(Page 2-1)
Front panel section
(Page 2-1)
Table ass’y
(Page 2-2)
Rear panel section
(Page 2-2)
MB-85 board
(Page 2-1)
AU-215 board
(Page 2-1)
Rotary motor ass’y
(M951) (Page 2-2)
Chassis ass’y
(Page 2-2)
BU holder ass’y
(Page 2-3)
TK-53 board
(Page 2-3)
Loading motor ass’y
(M991) (Page 2-3)
Optical pick-up
(Page 2-3)
3.
DISC REMOVAL PROCEDURE
(at POWER OFF)
(at POWER OFF)
1) Insert a flat-blade screwdriver into a hole at the bottom, and
rotare the cam gear in direction A. (See Fig. 2)
Table
Hole
Cam gear
A
Case
Two tapping screws
Three tapping screws
Two tapping screws
Fig. 1
Fig. 2
Click on the first or last page to see other DVP-C650D / DVP-C653D service manuals if exist.