Read Sony DAV-DS1000 / DVX-DS1000 Service Manual online
DVX-DS1000
2
SELF DIAGNOSIS FUNCTION
Self-diagnosis Function
(When letters/numbers appear in the
display)
When the self-diagnosis function is
activated to prevent the system from
malfunctioning. In this case a five-character
service number (e.g., C 13 00) with a
combination of a letter and digits appears on
the screen (Some numbers also appear in the
front panel display).
Refer to the following table.
activated to prevent the system from
malfunctioning. In this case a five-character
service number (e.g., C 13 00) with a
combination of a letter and digits appears on
the screen (Some numbers also appear in the
front panel display).
Refer to the following table.
First three
characters of
the service
number
characters of
the service
number
C 13
C 31
C 71
E XXXX
(xxxx is a number)
Cause and/or Corrective
Action
Action
The disc is dirty.
, Clean the disc with a soft
, Clean the disc with a soft
cloth (page 10).
The disc is not inserted
correctly.
, Re-insert the disc
correctly.
, Re-insert the disc
correctly.
The tuner is not connected
correctly.
, Check that it is connected
correctly.
, Check that it is connected
correctly.
To prevent a malfunction, the
system has performed the self-
diagnosis function.
, Contact your nearest Sony
system has performed the self-
diagnosis function.
, Contact your nearest Sony
dealer or local authorized
Sony service facility and
give the 5-character
service number.
Example: E 61 10
Sony service facility and
give the 5-character
service number.
Example: E 61 10
C:13:00
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
Click on the first or last page to see other DAV-DS1000 / DVX-DS1000 service manuals if exist.