Read Sony BDP-S550 Service Manual online
Sony Corporation
Video Business Group
SERVICE MANUAL
9-883-991-11
2008I0500-1
© 2008.9
Published by Quality Assurance Dept.
BLU-RAY DISC/DVD PLAYER
Ver. 1.0 2008.09
BDP-S550
RMT-B103A/B103P
SPECIFICATIONS
US Model
Canadian Model
AEP Model
UK Model
Australian Model
Russian Model
Hong Kong Model
Thai Model
TM
System
Laser:
Semiconductor laser
Inputs and outputs
(
Jack name:
Jack type/Output level/Load impedance)
LINE OUT AUDIO L/R:
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (OPTICAL):
Optical output jack/–18 dBm
(wave length 660 nm)
(wave length 660 nm)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
MULTI CHANNEL OUTPUT:
Phono jack/2 Vrms/10 kilohms
HDMI OUT:
HDMI 19-pin standard connector
COMPONENT VIDEO OUT
(Y, P
B
, P
R
) (US, Canadian):
Phono jack/Y: 1.0 Vp-p/
P
P
B
, P
R
: 0.7 Vp-p/75 ohms
LINE OUT VIDEO:
Phono jack/1.0 Vp-p/75 ohms
LINE OUT S VIDEO:
4-pin mini DIN/
Y
(US, Canadian, Hong Kong, Thai)
Y
(US, Canadian, Hong Kong, Thai)
: 1.0 Vp-p, C: 0.286 Vp-p/75 ohms
LAN (100):
100BASE-TX Terminal
EXT:
External memory slot (For connecting the
external memory)
DC output: 5 V 500 mA Max
external memory)
DC output: 5 V 500 mA Max
General
Power requirements:
120 V AC, 60 Hz (US, Canadian)
Power consumption:
28 W
Dimensions (approx.):
430 mm × 220 mm × 70 mm
(17 in. × 8
(17 in. × 8
3
/
4
in. × 2
3
/
4
in.)
(width/depth/height) incl. projecting parts
Mass (approx.):
3.3 kg (7
1
/
4
lb)
Operating temperature:
5 ºC to3 5 ºC( 41 °Ft o 95 °F)
Operating humidity:
25 % to 80 %
Supplied accessories
Specifications and design are subject to
change without notice.
change without notice.
• Audio/video cable (phono plug ×3) (1)
• AC power cord (1)
• External memory (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
• AC power cord (1)
• External memory (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
(Y, P
B
/C
B
, P
R
/C
R
) (Except US, Canadian):
Phono jack/Y: 1.0 Vp-p/
P
P
B
/C
B
, P
R
/C
R
: 0.7 Vp-p/75 ohms
4-pin mini DIN/
(AEP, UK, Australian, Russian)
Y: 1.0 Vp-p, C: 0.3 Vp-p/75 ohms
220–240 V AC, 50/60 Hz (AEP, UK, Australian, Russian)
110–240 V AC, 50/60 Hz (Hong Kong, Thai)
– –
BDP-S550
SAFETY CHECK-OUT
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers' instructions to use these
instruments.
instruments.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit” indication
is 0.75V, so analog meters must have an accurate low-voltage
scale. The Simpson 250 and Sanwa SH-63Trd are examples
of a passive VOM that is suitable. Nearly all battery operated
digital multimeters that have a 2V AC range are suitable. (See
Fig. A)
is 0.75V, so analog meters must have an accurate low-voltage
scale. The Simpson 250 and Sanwa SH-63Trd are examples
of a passive VOM that is suitable. Nearly all battery operated
digital multimeters that have a 2V AC range are suitable. (See
Fig. A)
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
and bridges.
2. Check the interboard wiring to ensure that no wires are “pinched”
or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors,
that were installed during a previous repair. Point them out to
the customer and recommend their replacement.
the customer and recommend their replacement.
4. Look for parts which, though functioning, show obvious signs
of deterioration. Point them out to the customer and recommend
their replacement.
their replacement.
5. Check the line cord for cracks and abrasion. Recommend the
replacement of any such line cord to the customer.
6. Check the B+ voltage to see it is at the values specified.
7. Check the antenna terminals, metal trim, “metallized” knobs,
7. Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage. Check
leakage as described below.
leakage as described below.
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer:
safety checks before releasing the set to the customer:
1.5 k
0.15
µ
F
AC
voltmeter
(0.75 V)
voltmeter
(0.75 V)
To Exposed Metal
Parts on Set
Parts on Set
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 25 cm FROM THE SURFACE OF THE OBJEC-
TIVE LENS ON THE OPTICAL PICK-UP BLOCK.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 25 cm FROM THE SURFACE OF THE OBJEC-
TIVE LENS ON THE OPTICAL PICK-UP BLOCK.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0 OR DOTTED LINE
WITH MARK
0 ON THE SCHEMATIC DIAGRAMS AND IN THE
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE
0
SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE
DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉ-
MENTS PUBLIÉS PAR SONY.
DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉ-
MENTS PUBLIÉS PAR SONY.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than
• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
The use of optical instrument with this product will increase eye
hazard.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radia-
tion exposure.
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radia-
tion exposure.
2
WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus
to rain or moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing to
qualified personnel only.
shock, do not expose this apparatus
to rain or moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing to
qualified personnel only.
Batteries or batteries installed
apparatus shall not be exposed to
excessive heat such as sunshine,
fire or the like.
apparatus shall not be exposed to
excessive heat such as sunshine,
fire or the like.
CAUTION
The use of optical instruments with
this product will increase eye
hazard. As the laser beam used in
this Blu-ray Disc/DVD player is
harmful to eyes, do not attempt to
disassemble the cabinet.
Refer servicing to qualified
personnel only.
this product will increase eye
hazard. As the laser beam used in
this Blu-ray Disc/DVD player is
harmful to eyes, do not attempt to
disassemble the cabinet.
Refer servicing to qualified
personnel only.
This label is located on the laser
protective housing inside the
enclosure.
protective housing inside the
enclosure.
This appliance is classified as a
CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT
MARKING is located on the laser
protective housing inside the
enclosure. (Except US, Canadian)
CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT
MARKING is located on the laser
protective housing inside the
enclosure. (Except US, Canadian)
Notice for customers in the
United Kingdom and
Republic of Ireland
A molded plug complying with
BS1363 is fitted to this equipment
for your safety and convenience.
Should the fuse in the plug
supplied need to be replaced, a 5
AMP fuse approved by ASTA or
BSI to BS1362, (i.e., marked with
A molded plug complying with
BS1363 is fitted to this equipment
for your safety and convenience.
Should the fuse in the plug
supplied need to be replaced, a 5
AMP fuse approved by ASTA or
BSI to BS1362, (i.e., marked with
or
mark) must be used.
If the plug supplied with this
equipment has a detachable fuse
cover, be sure to attach the fuse
cover after you change the fuse.
Never use the plug without the fuse
cover. If you should lose the fuse
cover, please contact your nearest
Sony service station.
equipment has a detachable fuse
cover, be sure to attach the fuse
cover after you change the fuse.
Never use the plug without the fuse
cover. If you should lose the fuse
cover, please contact your nearest
Sony service station.
Disposal of Old Electrical
& Electronic Equipment
(Applicable in the
European Union and
other European countries
with separate collection
systems)
& Electronic Equipment
(Applicable in the
European Union and
other European countries
with separate collection
systems)
This symbol on the product or on
its packaging indicates that this
product shall not be treated as
household waste. Instead it shall be
handed over to the applicable
collection point for the recycling of
electrical and electronic
equipment. By ensuring this
product is disposed of correctly,
you will help prevent potential
negative consequences for the
environment and human health,
which could otherwise be caused
by inappropriate waste handling of
this product. The recycling of
materials will help to conserve
natural resources. For more
detailed information about
recycling of this product, please
contact your local Civic Office,
your household waste disposal
service or the shop where you
purchased the product.
its packaging indicates that this
product shall not be treated as
household waste. Instead it shall be
handed over to the applicable
collection point for the recycling of
electrical and electronic
equipment. By ensuring this
product is disposed of correctly,
you will help prevent potential
negative consequences for the
environment and human health,
which could otherwise be caused
by inappropriate waste handling of
this product. The recycling of
materials will help to conserve
natural resources. For more
detailed information about
recycling of this product, please
contact your local Civic Office,
your household waste disposal
service or the shop where you
purchased the product.
Disposal of waste
batteries (applicable in
the European Union and
other European countries
with separate collection
systems)
batteries (applicable in
the European Union and
other European countries
with separate collection
systems)
This symbol on the battery or on
the packaging indicates that the
battery provided with this product
shall not be treated as household
waste.
By ensuring these batteries are
disposed of correctly, you will help
prevent potentially negative
consequences for the environment
and human health which could
otherwise be caused by
inappropriate waste handling of the
battery. The recycling of the
materials will help to conserve
natural resources.
the packaging indicates that the
battery provided with this product
shall not be treated as household
waste.
By ensuring these batteries are
disposed of correctly, you will help
prevent potentially negative
consequences for the environment
and human health which could
otherwise be caused by
inappropriate waste handling of the
battery. The recycling of the
materials will help to conserve
natural resources.
In case of products that for safety,
performance or data integrity
reasons require a permanent
connection with an incorporated
battery, this battery should be
replaced by qualified service staff
only.
To ensure that the battery will be
treated properly, hand over the
product at end-of-life to the
applicable collection point for the
recycling of electrical and
electronic equipment.
performance or data integrity
reasons require a permanent
connection with an incorporated
battery, this battery should be
replaced by qualified service staff
only.
To ensure that the battery will be
treated properly, hand over the
product at end-of-life to the
applicable collection point for the
recycling of electrical and
electronic equipment.
For all other batteries, please view
the section on how to remove the
battery from the product safely.
Hand the battery over to the
applicable collection point for the
recycling of waste batteries.
the section on how to remove the
battery from the product safely.
Hand the battery over to the
applicable collection point for the
recycling of waste batteries.
For more detailed information
about recycling of this product or
battery, please contact your local
Civic Office, your household
waste disposal service or the shop
where you purchased the product.
about recycling of this product or
battery, please contact your local
Civic Office, your household
waste disposal service or the shop
where you purchased the product.
2
WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus
to rain or moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing to
qualified personnel only.
shock, do not expose this apparatus
to rain or moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing to
qualified personnel only.
Batteries or batteries installed
apparatus shall not be exposed to
excessive heat such as sunshine,
fire or the like.
apparatus shall not be exposed to
excessive heat such as sunshine,
fire or the like.
CAUTION
The use of optical instruments with
this product will increase eye
hazard. As the laser beam used in
this Blu-ray Disc/DVD player is
harmful to eyes, do not attempt to
disassemble the cabinet.
Refer servicing to qualified
personnel only.
this product will increase eye
hazard. As the laser beam used in
this Blu-ray Disc/DVD player is
harmful to eyes, do not attempt to
disassemble the cabinet.
Refer servicing to qualified
personnel only.
This label is located on the laser
protective housing inside the
enclosure.
protective housing inside the
enclosure.
This appliance is classified as a
CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT
MARKING is located on the laser
protective housing inside the
enclosure. (Except US, Canadian)
CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT
MARKING is located on the laser
protective housing inside the
enclosure. (Except US, Canadian)
Notice for customers in the
United Kingdom and
Republic of Ireland
A molded plug complying with
BS1363 is fitted to this equipment
for your safety and convenience.
Should the fuse in the plug
supplied need to be replaced, a 5
AMP fuse approved by ASTA or
BSI to BS1362, (i.e., marked with
A molded plug complying with
BS1363 is fitted to this equipment
for your safety and convenience.
Should the fuse in the plug
supplied need to be replaced, a 5
AMP fuse approved by ASTA or
BSI to BS1362, (i.e., marked with
or
mark) must be used.
If the plug supplied with this
equipment has a detachable fuse
cover, be sure to attach the fuse
cover after you change the fuse.
Never use the plug without the fuse
cover. If you should lose the fuse
cover, please contact your nearest
Sony service station.
equipment has a detachable fuse
cover, be sure to attach the fuse
cover after you change the fuse.
Never use the plug without the fuse
cover. If you should lose the fuse
cover, please contact your nearest
Sony service station.
Disposal of Old Electrical
& Electronic Equipment
(Applicable in the
European Union and
other European countries
with separate collection
systems)
& Electronic Equipment
(Applicable in the
European Union and
other European countries
with separate collection
systems)
This symbol on the product or on
its packaging indicates that this
product shall not be treated as
household waste. Instead it shall be
handed over to the applicable
collection point for the recycling of
electrical and electronic
equipment. By ensuring this
product is disposed of correctly,
you will help prevent potential
negative consequences for the
environment and human health,
which could otherwise be caused
by inappropriate waste handling of
this product. The recycling of
materials will help to conserve
natural resources. For more
detailed information about
recycling of this product, please
contact your local Civic Office,
your household waste disposal
service or the shop where you
purchased the product.
its packaging indicates that this
product shall not be treated as
household waste. Instead it shall be
handed over to the applicable
collection point for the recycling of
electrical and electronic
equipment. By ensuring this
product is disposed of correctly,
you will help prevent potential
negative consequences for the
environment and human health,
which could otherwise be caused
by inappropriate waste handling of
this product. The recycling of
materials will help to conserve
natural resources. For more
detailed information about
recycling of this product, please
contact your local Civic Office,
your household waste disposal
service or the shop where you
purchased the product.
Disposal of waste
batteries (applicable in
the European Union and
other European countries
with separate collection
systems)
batteries (applicable in
the European Union and
other European countries
with separate collection
systems)
This symbol on the battery or on
the packaging indicates that the
battery provided with this product
shall not be treated as household
waste.
By ensuring these batteries are
disposed of correctly, you will help
prevent potentially negative
consequences for the environment
and human health which could
otherwise be caused by
inappropriate waste handling of the
battery. The recycling of the
materials will help to conserve
natural resources.
the packaging indicates that the
battery provided with this product
shall not be treated as household
waste.
By ensuring these batteries are
disposed of correctly, you will help
prevent potentially negative
consequences for the environment
and human health which could
otherwise be caused by
inappropriate waste handling of the
battery. The recycling of the
materials will help to conserve
natural resources.
In case of products that for safety,
performance or data integrity
reasons require a permanent
connection with an incorporated
battery, this battery should be
replaced by qualified service staff
only.
To ensure that the battery will be
treated properly, hand over the
product at end-of-life to the
applicable collection point for the
recycling of electrical and
electronic equipment.
performance or data integrity
reasons require a permanent
connection with an incorporated
battery, this battery should be
replaced by qualified service staff
only.
To ensure that the battery will be
treated properly, hand over the
product at end-of-life to the
applicable collection point for the
recycling of electrical and
electronic equipment.
For all other batteries, please view
the section on how to remove the
battery from the product safely.
Hand the battery over to the
applicable collection point for the
recycling of waste batteries.
the section on how to remove the
battery from the product safely.
Hand the battery over to the
applicable collection point for the
recycling of waste batteries.
For more detailed information
about recycling of this product or
battery, please contact your local
Civic Office, your household
waste disposal service or the shop
where you purchased the product.
about recycling of this product or
battery, please contact your local
Civic Office, your household
waste disposal service or the shop
where you purchased the product.
– 3 –
BDP-S550
TABLE OF CONTENTS
Section
Title
Page
Section
Title
Page
1.
SERVICE NOTE
1-1. Disc Removal Procedure If The Tray Cannot Be
Ejected (Forced Ejection) ............................................. 1-1
1-2. Attention at installation of harness (DM-146) ............... 1-1
1-3. Test Disc ....................................................................... 1-2
1-3-1. Operation and Display ............................................. 1-2
1-3. Test Disc ....................................................................... 1-2
1-3-1. Operation and Display ............................................. 1-2
2.
DISASSEMBLY
2-1. Disassembly Flow ........................................................ 2-1
2-2. Side Panel (R/L) ........................................................... 2-2
2-3. Top Panel Assy ............................................................. 2-2
2-4. Top Shield..................................................................... 2-3
2-5. Tray Cover Assy ........................................................... 2-3
2-6. Front Panel Assy .......................................................... 2-4
2-7. IFD-001 Board .............................................................. 2-4
2-8. Front Chassis Block ..................................................... 2-5
2-9. Rear Panel Block.......................................................... 2-5
2-10. Switching Regulator ..................................................... 2-6
2-11. BD Drive ....................................................................... 2-6
2-12. MB-124 Board .............................................................. 2-7
2-13. Circuit Boards Location ................................................ 2-7
2-2. Side Panel (R/L) ........................................................... 2-2
2-3. Top Panel Assy ............................................................. 2-2
2-4. Top Shield..................................................................... 2-3
2-5. Tray Cover Assy ........................................................... 2-3
2-6. Front Panel Assy .......................................................... 2-4
2-7. IFD-001 Board .............................................................. 2-4
2-8. Front Chassis Block ..................................................... 2-5
2-9. Rear Panel Block.......................................................... 2-5
2-10. Switching Regulator ..................................................... 2-6
2-11. BD Drive ....................................................................... 2-6
2-12. MB-124 Board .............................................................. 2-7
2-13. Circuit Boards Location ................................................ 2-7
3.
BLOCK DIAGRAMS
3-1. Overall Block Diagram (1/2) ......................................... 3-1
3-2. Overall Block Diagram (2/2) ......................................... 3-2
3-3. DSP Block Diagram ...................................................... 3-3
3-4. A/V OUT Block Diagram ............................................... 3-4
3-5. USB/ETHER Block Diagram ........................................ 3-5
3-6. IT Block Diagram .......................................................... 3-6
3-7. Power Block Diagram (1/2) .......................................... 3-7
3-8. Power Block Diagram (2/2) .......................................... 3-8
3-2. Overall Block Diagram (2/2) ......................................... 3-2
3-3. DSP Block Diagram ...................................................... 3-3
3-4. A/V OUT Block Diagram ............................................... 3-4
3-5. USB/ETHER Block Diagram ........................................ 3-5
3-6. IT Block Diagram .......................................................... 3-6
3-7. Power Block Diagram (1/2) .......................................... 3-7
3-8. Power Block Diagram (2/2) .......................................... 3-8
4.
SCHEMATIC DIAGRAMS
4-1. This Note Is Common For Schematic Diagrams .......... 4-1
4-2. Frame Schematic Diagram........................................... 4-2
4-3. AV-124 Board (AUDIO OUT)
4-2. Frame Schematic Diagram........................................... 4-2
4-3. AV-124 Board (AUDIO OUT)
Schematic Diagram (1/2).............................................. 4-3
4-4. AV-124 Board (VIDEO OUT)
Schematic Diagram (2/2).............................................. 4-4
4-5. FC-094 Board (LED) Schematic Diagram .................... 4-5
4-6. FL-185 Board (SWITCH) Schematic Diagram ............. 4-6
4-7. FR-288 Board (FL DRIVER)
4-6. FL-185 Board (SWITCH) Schematic Diagram ............. 4-6
4-7. FR-288 Board (FL DRIVER)
Schematic Diagram ...................................................... 4-7
4-8. IFD-001 Board (POWER)
Schematic Diagram (1/3).............................................. 4-8
4-9. IFD-001 Board (IF CONTROLLER)
Schematic Diagram (2/3).............................................. 4-9
4-10. IFD-001 Board (FAN) Schematic Diagram (3/3)........... 4-10
4-11. MB-124 Board (EMMA3P DDR2-A)
4-11. MB-124 Board (EMMA3P DDR2-A)
Schematic Diagram (1/11) ............................................ 4-11
4-12. MB-124 Board (EMMA3P DDR2-B)
Schematic Diagram (2/11) ............................................ 4-12
4-13. MB-124 Board (POWER1)
Schematic Diagram (3/11) ............................................ 4-13
4-14. MB-124 Board (CLK/POWER2)
Schematic Diagram (4/11) ............................................ 4-14
4-15. MB-124 Board (FLASH/HOST)
Schematic Diagram (5/11) ............................................ 4-15
4-16. MB-124 Board (USB) Schematic Diagram (6/11) ......... 4-16
4-17. MB-124 Board (HDMI/SATA)
4-17. MB-124 Board (HDMI/SATA)
Schematic Diagram (7/11) ............................................ 4-17
4-18. MB-124 Board (AUDIO/VIDEO)
Schematic Diagram (8/11) ............................................ 4-18
4-19. MB-124 Board (GPIO/JTAG)
Schematic Diagram (9/11) ............................................ 4-19
4-20. MB-124 Board (IPIO)
Schematic Diagram (10/11) .......................................... 4-20
4-21. MB-124 Board (ETHERNET)
Schematic Diagram (11/11) .......................................... 4-21
4-22. USB-006 Board (USB CONNECTOR)
Schematic Diagram ...................................................... 4-22
4-23. Waveforms ................................................................... 4-23
5.
PRINTED WIRING BOARDS
5-1. This Note Is Common For Printed Wiring Boards ........ 5-1
5-2. AV-124 Board (AUDIO/VIDEO OUT)
5-2. AV-124 Board (AUDIO/VIDEO OUT)
Printed Wiring Board (Side A) ...................................... 5-2
5-3. AV-124 Board (AUDIO/VIDEO OUT)
Printed Wiring Board (Side B) ...................................... 5-3
5-4. FC-094 Board (LED) Printed Wiring Board .................. 5-4
5-5. FL-185 Board (SWITCH) Printed Wiring Board............ 5-5
5-6. FR-288 Board (FL DRIVER)
5-5. FL-185 Board (SWITCH) Printed Wiring Board............ 5-5
5-6. FR-288 Board (FL DRIVER)
Printed Wiring Board (Side A) ...................................... 5-6
5-7. FR-288 Board (FL DRIVER)
Printed Wiring Board (Side B) ...................................... 5-7
5-8. IFD-001 Board (IF CONTROLLER)
Printed Wiring Board (Side A) ...................................... 5-8
5-9. IFD-001 Board (IF CONTROLLER)
Printed Wiring Board (Side B) ...................................... 5-9
5-10. MB-124 Board (MAIN)
Printed Wiring Board (Side A) ...................................... 5-10
5-11. MB-124 Board (MAIN)
Printed Wiring Board (Side B) ...................................... 5-11
5-12. USB-006 Board (USB CONNECTOR)
Printed Wiring Board .................................................... 5-12
6.
IC PIN FUNCTION DESCRIPTION
................... 6-1
7.
SERVICE MODE
..................................................... 7-1
8.
ERROR LOG LIST
................................................. 8-1
9.
TROUBLESHOOTING
............................................. 9-1
10. REPAIR PARTS LIST
10-1. Exploded Views ............................................................ 10-1
10-1-1. Panel Section .......................................................... 10-1
10-1-2. Front/Rear Chassis Section .................................... 10-2
10-1-3. Main Chassis Section .............................................. 10-3
10-1-4. Accessories ............................................................. 10-4
10-2. Electrical Parts List ....................................................... 10-5
10-1-1. Panel Section .......................................................... 10-1
10-1-2. Front/Rear Chassis Section .................................... 10-2
10-1-3. Main Chassis Section .............................................. 10-3
10-1-4. Accessories ............................................................. 10-4
10-2. Electrical Parts List ....................................................... 10-5
1-1
BDP-S550
SECTION 1
SERVICE NOTE
1-1. DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)
1. Remove the side panel (R/L). (Refer to page 2-2)
2. Remove the top panel assy. (Refer to page 2-2)
3. Remove the top shield. (Refer to page 2-3)
4. Insert a clip in the hole of a drive and open a tray.
2. Remove the top panel assy. (Refer to page 2-2)
3. Remove the top shield. (Refer to page 2-3)
4. Insert a clip in the hole of a drive and open a tray.
Note: Use a clip of about 1.2 mm in the diameter
clip
(Use that of about 1.2 mm in the diameter)
(Use that of about 1.2 mm in the diameter)
hole
tray
1-2. Attention at installation of harness (DM-146)
Push at Harness root.
Upper case
Lead pin dressing method change.
From top side.
From top side.
Harness (DM-146) bending height.
Less than Heat-sink height.
Less than Heat-sink height.
Need distance: Over 5 mm.
Actual: Around 12 mm after ben.
Actual: Around 12 mm after ben.