Read Sony BDP-S495 Service Manual online
1-24E
1-5-4. FL harness (FLM-006) dressing method.
BDP-S495
1
Hook
Guide
Guide
Hold upward
1. Ensure connector mating condition fully inserted (No slanting / No pin dislocated).
2. Ensure FR-321 PWB aligned to chassis front hook (x1) and guide (x2).
2. Ensure FR-321 PWB aligned to chassis front hook (x1) and guide (x2).
3. Ensure Earth Plate (USB) fully inserted and no gap.
4. Ensure FR FFC (FIM-034) fully inserted and not slanting.
4. Ensure FR FFC (FIM-034) fully inserted and not slanting.
5. Ensure connector mating condition fully inserted (No slanting / No pin dislocated).
6. Ensure FL Harness (FLM-006) dressing is almost center on flat-front-area of BU's holde r chuck.
7. Ensure Hemeron tape applied on FL Harness (FLM-006) is within the specified area
on BU's holder chuck.
6. Ensure FL Harness (FLM-006) dressing is almost center on flat-front-area of BU's holde r chuck.
7. Ensure Hemeron tape applied on FL Harness (FLM-006) is within the specified area
on BU's holder chuck.
2
3
4
6
7
5
Hameron tape
Click on the first or last page to see other BDP-S495 service manuals if exist.