Read Sony BDP-S300 / BDP-S301 (serv.man2) Service Manual online
– 4 –
SERVICE NOTE
1. DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)
1. Remove the upper case. (Refer to page 2-1)
2. Insert a clip in the hole of a drive and open a tray.
2. Insert a clip in the hole of a drive and open a tray.
clip
tray
2.
INSTALLATION METHOD OF EARTH SPRING (FRONT)
1. Please install earth spring (front) at an installation position of right and left in a front frame.
Please be careful to directions of installation.
2. Please fix by for each one place with a screw.
earth spring (front)
3.
INSTALLATION METHOD OF REAR GASKET
1. Please remove a rear panel fixed screw and jack fixed screw (total 9 screws) and remove a rear panel.
2. Please stick a rear gasket inside the lower part of a rear panel. Refer to a lower picture. The location of the gasket is between the
2. Please stick a rear gasket inside the lower part of a rear panel. Refer to a lower picture. The location of the gasket is between the
optical terminal and the audio terminal.
3. Please install a rear panel in the chassis from the slanting bottom and install a removed screws.
rear gasket
Click on the first or last page to see other BDP-S300 / BDP-S301 (serv.man2) service manuals if exist.