Read Sony AVD-S10 Service Manual online
11
AVD-S10
Note 1:
About “R”
As this unit has only a few buttons, some operations require
the use of remote commander (RM-SP10/provided with unit:
1-477-322-11) buttons. These operations are indicated as “R”
in this manual.
Example:
As this unit has only a few buttons, some operations require
the use of remote commander (RM-SP10/provided with unit:
1-477-322-11) buttons. These operations are indicated as “R”
in this manual.
Example:
ENTER
“R”
...Press the
ENTER
button of the
remote commander.
Note 2:
Incorrect operations may be performed if the test mode is not
entered properly.
In this case, press the
entered properly.
In this case, press the
POWER
button to turn the power off,
and retry to enter the test mode.
3-1. Version Display Mode
Procedure:
1.
1.
Press the A button on the main unit or 1
“R”
button on the
remote commander to turn the set on.
2.
Press three buttons of
FUNCTION
, . and A
simultaneously for two seconds.
3.
The message “VER. 1. ** ” is displayed for a moment.
3-2. Jog Test Mode
Procedure:
1.
1.
Press the A button on the main unit or 1
“R”
button on the
remote commander to turn the set on.
2.
Press three buttons of
BAND
, x and A simultaneously.
3.
The fluorescent indicator displays “JOG 0”. The value “JOG
0” increases like +1, +2, +3... if rotating the VOLUME knob
clockwisw,or it decreases like –1, –2, –3,.... if rotating counter-
clockwise.
0” increases like +1, +2, +3... if rotating the VOLUME knob
clockwisw,or it decreases like –1, –2, –3,.... if rotating counter-
clockwise.
4.
To exit from this mode, press the
POWER
button to turn the
set off.
3-3. Key Test Mode
Procedure:
1.
1.
Press the A button on the main unit or 1
“R”
button on the
remote commander to turn the set on.
2.
Press three buttons of
DISPLAY
, x and A simultaneously.
3.
The message “KEY NUM 0” is displayed and “0” blinks.
4.
Each time a button is pressed, “KEY NUM 0” value increases.
However, once a button is pressed, it is no longer taken into
account.
However, once a button is pressed, it is no longer taken into
account.
5.
When all buttons are pressed, “KEY NUM 11” appears and
the number blinking is stopped.
the number blinking is stopped.
6.
To exit from this mode, press the
POWER
button to turn the
set off.
3-4. Display Test Mode
Procedure:
1.
1.
Press the A button on the main unit or 1
“R”
button on the
remote commander to turn the set on.
2.
Press three buttons of
BAND
, X and A simultaneously.
3.
All segments are turned on.
4.
When the > button is pressed, the display will light up as
follows.
follows.
5.
Press the > button, confirm the display.
6.
Press the > button, all segments are turned off.
7.
Every pressing of the > button turns on each segments in
the same order.
the same order.
8.
To exit from this mode, press the
POWER
button to turn the
set off.
3-5. OSD Test Mode
Procedure:
1.
1.
Press the A button on the main unit or 1
“R”
button on the
remote commander to turn the set on.
2.
Set the
FUNCTION
to DVD.
3.
While pressing two buttons of
DISPLAY
and
x simultaneously, turn the VOLUME knob clockwise.
4.
The Test Mode Menu is displayed on the TV screen.
5.
To execute each function, select the number on the remote
commander.
commander.
6.
See the following section for explanation in detail.
7.
To exit from this mode, press the
POWER
button to turn the
set off.
3-6. Disc Tray Lock
Procedure:
1.
1.
Press the A button on the main unit or 1
“R”
button on the
remote commander to turn the set on.
2.
Press two buttons of
DISPLAY
and . simultaneously for
two seconds.
3.
The message “LOCKED” is displayed and the tray is locked.
(Even if exiting from this mode, the tray is still locked.)
(Even if exiting from this mode, the tray is still locked.)
4.
Press two buttons of
DISPLAY
and .
simultaneously for
two seconds again.
5.
The message “UNLOCKED” is displayed and the tray is
unlocked.
unlocked.
6.
To exit from this mode, press the
POWER
button to turn the
set off.
3-7.
General Description
The Test Mode allows you to make diagnosis and adjustment easily
using the remote commander and monitor TV. The instructions,
diagnostic results, etc. are given on the on-screen display (OSD).
using the remote commander and monitor TV. The instructions,
diagnostic results, etc. are given on the on-screen display (OSD).
3-8.
Starting Test Mode
Set the FUNCTION to DVD with the main unit power on. Next,
while pushing the x button and the
while pushing the x button and the
DISPLAY
button on the main
unit at the same time, turn the
VOLUME
knob to the right to start
Test Mode and display the menu shown below on the TV screen. At
the bottom of the menu screen, the model name and revision number
are displayed.
To execute each function, select the desired menu and press its
number on the remote commander. To exit from Test Mode, press
the
the bottom of the menu screen, the model name and revision number
are displayed.
To execute each function, select the desired menu and press its
number on the remote commander. To exit from Test Mode, press
the
POWER
button.
SECTION 3
TEST MODE
ALL 1 DISCS AUTO
TITLE
TRACK
CHAPTER
INDEX
HTUNED
M MONO
ST S
dB REPEAT 1
kHz PROGRAM
MHz SHUFFLE
kHz PROGRAM
MHz SHUFFLE
PRO LOGIC
DIGITAL FM AM
NTSC PBC ANGLE
D
D
D
D
dts PCM
ALL 1 DISCS AUTO
TITLE
TRACK
CHAPTER
INDEX
HTUNED
M MONO
ST S
dB REPEAT 1
kHz PROGRAM
MHz SHUFFLE
kHz PROGRAM
MHz SHUFFLE
PRO LOGIC
DIGITAL FM AM
NTSC PBC ANGLE
D
D
D
D
dts PCM
Test Mode Menu
0. Syscon Diagnosis
1. Drive Auto Adjustment
2. Drive Manual Operation
3. Mecha Aging
4. Emergency History
5. Version Information
6. Video Level Adjustment
Exit: POWER Key
_
Model
: SOZ-1269_CE
Revision : 1.xxx
Last Off:01
Click on the first or last page to see other AVD-S10 service manuals if exist.