SLT-A65, SLT-A65K, SLT-A65L, SLT-A65M, SLT-A65V, SLT-A65VK, SLT-A65VL, SLT-A65VM, SLT-A65VX, SLT-A65VY, SLT-A65X, SLT-A65Y - Sony Digital Camera Service Manual (repair manual). Page 9

Read Sony SLT-A65 / SLT-A65K / SLT-A65L / SLT-A65M / SLT-A65V / SLT-A65VK / SLT-A65VL / SLT-A65VM / SLT-A65VX / SLT-A65VY / SLT-A65X / SLT-A65Y Service Manual online

SLT-A65/A65K/A65L/A65M/A65V/A65VK/A65VL/A65VM/A65VX/A65VY/A65X/A65Y_L2
1-5
– ENGLISH –
1-8. GPS RECEIVING CHECK (SLT-A65V/A65VK/
A65VL
/A65VM/
A65VX
/A65VY)
After a part of set was replaced or after the set was assembled, check the reception of GPS signal.
1-7.  METHOD FOR REPLACING THE AS HOLDER ACTUATOR ASSY
Removal Procedure
Note: Make sure to perform the removal procedures after removing the 
 
 AS Slider B Assy.
(1)  Remove the solder on the enamel wires at two places.
 
Solder
(2)  Remove the flexible board from the hook on the AS Holder Actuator 
 Assy.
 
Hook
(3)  Remove the four screws to remove the AS Holder Actuator Assy.
 
AS Holder Actuator Assy
Assembly Procedure
Note: Make sure to perform the assembly procedures before assembling  
 
 the AS Slider B Assy.
The assembly procedure is the reverse of the removal procedure.
Apply grease to the portions indicated below.
 
AS Holder Actuator Assy
G
G-15 and G G-116
1-9.  NOTE ON REMOVING THE AP IRIS RING
If the AP Iris Ring is removed, the aperture charge cannot be retained. Therefore, after removing the AP Iris Ring, retain the charge in the procedure 
below.
(4)  While keeping the pin inserted, remove the Ring Roller B (SV) and 
AP Ring Roller C.
 
Pin
AP Ring Roller C
Ring Roller B (SV)
(5)  While keeping the pin inserted, remove the AP Iris Ring.
 
Pin
AP Iris Ring
(1)  Rotate clockwise the AP Iris Ring as far as it goes.
 
AP Iris Ring
(2) Remove 
the MB H Mount, MB Mount Spacer,  and MB Ring SP COM, 
unscrewing six screws.
 
MB Mount Spacer
MB ring SP COM
MB H mount
(3)  Insert the pin (approx. 1mm in diameter) through the hole of front 
frame and drop the tip of pin in the cut portion of AP Sensor Gear to 
fix the AP Sensor Gear.
Pin
Pin
Cut portion of
AP Sensor Gear
Hole of front
frame
The changed portions from
Ver. 1.5 are shown in blue.
Ver. 1.6 2013.07
Page of 35
Display

Click on the first or last page to see other SLT-A65 / SLT-A65K / SLT-A65L / SLT-A65M / SLT-A65V / SLT-A65VK / SLT-A65VL / SLT-A65VM / SLT-A65VX / SLT-A65VY / SLT-A65X / SLT-A65Y service manuals if exist.