Read Sony SAL85F28 Service Manual online
2-7
SAL85F28 (2.8/85 SAM) (85mm F2.8 SAM)
HELP11
1. Install the rear frame assy to the front frame assy, and secure the rear frame assy with three screws.
Note:
Align the projection of the front frame assy with the cutout of the rear frame assy.
Rear Frame Ashy
Cutout
Cutout
Projection
Projection
Front Frame Ashy
HELP12
Grease (G-36): J-6082-667-A
1. Apply the grease (G-36) to the rear frame assy.
Apply the grease (G-36)
Apply the grease (G-36)
Apply the grease (G-36)
Apply the grease (G-36)
HELP13
Grease (G-36): J-6082-667-A
1. Apply the grease (G-36) to the indicated portions of helicoid male and helicoid female.
Apply the grease (G-36)
Apply the grease (G-36)
Apply the grease (G-36)
Focus Ring Assy
(Cross section)
(Cross section)
Helicoid Female
(Cross section)
(Cross section)
Helicoid Male
2. Set the focus ring assy to the infinity (
∞
) end.
3. Assemble the helicoid male into the helicoid female with rotating counterclockwise the helicoid male.
Note 1:
Insert the helicoid male into the helicoid female so that aligning the index pin of middle lens barrel assy with the inscription
(PC) on the helicoid male.
Note 2:
Rotate clockwise the helicoid male until it clicks and engage the helicoid female with the helicoid male.
Note 3:
When assembling counterclockwise the helicoid male as far as it goes, confirm that the round concave of helicoid male and the
vertical groove of focus ring assy locate as shown in the illustration.
Note 2
Note 3
Middle Lens
Barrel Assy
Barrel Assy
Helicoid Male
Helicoid Male
Inscription
(PC)
(PC)
Focus Ring Assy
Helicoid Female
Helicoid Female
Index pin
Vertical groove of Focus Ring Assy
Round concave of Helicoid Male
Click on the first or last page to see other SAL85F28 service manuals if exist.