Read Sony SAL85F14Z Service Manual online
3-3
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
3-1-3. GEAR BASE PLATE (A) BLOCK, BRUSH AND FIXED HOLDING TUBE BLOCK
DISASSEMBLY
Ref. No.
Part No.
Description
101
2-684-170-01 SCREW (M1.6X3.0)
102
2-684-209-01 SCREW (M1.4X1.5)
103
2-693-400-01 PLATE (BRUSH HOLD PLATE)
104
2-693-399-01 CONTACT CHIP (BRUSH)
105
2-688-977-01 SCREW (M1.6X3.0)
106
2-693-398-01 PLATE (BRUSH BASE PLATE)
107
2-684-117-01 SCREW (M1.6X4.0)
108
A-1197-820-A BLOCK, GEAR BASE PLATE (A)
109 2-693-394-
02
PLATE (CAM TUBE REINFORCEMENT)
(Note 2)
110
9-913-210-03 POLYESTER TAPE (BLACK) 10mm (Note 1, 2)
111
Selection parts
PLATE (FOCUS SCALE PLATE)
(Note 3)
Ref. No.
Part No.
Description
Ver. 1.4 2008.01
The changed portions from
Ver. 1.3 are shown in blue.
Ver. 1.3 are shown in blue.
(Note 1)
Cut the polyster tape (black) 10mm (per roll) (Ref. No.
110) for specified size.
110) for specified size.
(Note 1, 2)
(Note 2)
(Note 3)
(Note 2)
(7x25mm)
(Note 1, 2)(7x25mm)
(Note 1)(10x25mm)
Polyester Tape
(Black) 10mm
(Black) 10mm
(Note 2)
In case of the focus ring is the old type and replace
the cam tube reinforcement plate, affix the polyester
tape (black) 10mm one time around the cam tube
reinforcement plate as shown in figure.
the cam tube reinforcement plate, affix the polyester
tape (black) 10mm one time around the cam tube
reinforcement plate as shown in figure.
Cam Tube
Reinforcement
Plate
Reinforcement
Plate
Cam Tube
Reinforcement
Plate
Reinforcement
Plate
Focus Cam Tube
102
103
104
105
105
110
107
108
109
110
110
109
111
106
101
(See Page 3-5.)
(See Page 3-4.)
(Note 3)
The type of this parts need to be selected according to
the type of focus cam ring.
Select the part referring to page 3-6.
the type of focus cam ring.
Select the part referring to page 3-6.
Click on the first or last page to see other SAL85F14Z service manuals if exist.