Read Sony SAL85F14Z Service Manual online
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP15
Adhesive Bond (B-10): J-6082-612-A
1.
Install the
aperture block
to the 1st moving barrel and fix it with the
aperture unit holding spring
.
2.
After adjusting the aperture diameter, apply the adhesive bond (B-10) to the indicated locations in figure. (3 locations)
HELP16
1.
Install the
aperture blade unit
with the iris wide open, inserting its boss in the boss hole of aperture unit holding ring.
2.
Install the
aperture blade unit
, overlaying it clockwise.
3.
Install the last
aperture blade unit
while releasing the
aperture blade unit
installed first in the arrow direction.
4.
Install the
aperture operate plate unit
and insert the boss of
aperture blade unit
in the oblong hole.
Aperture Block
1st Moving Barrel
Aperture Unit Holding Spring
Apply the adhesive bond (B-10)
Aperture Operate Plate Unit
Aperture Unit Holding Ring
Boss
Aperture Blade Unit
Ver. 1.3 2007.10
The changed portions from
Ver. 1.2 are shown in blue.
Ver. 1.2 are shown in blue.
Click on the first or last page to see other SAL85F14Z service manuals if exist.