Read Sony SAL70200G (serv.man2) Service Manual online
HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
HELP32
1.
Cut the aluminum tape in the specified size and affix it to the flexible PWB of stator.
Note:
Do not touch the area indicated in the figure.
2.
In addition, cut the polyester tape in the specified size and affix it to the flexible card of stator.
3.
Solder the harness as shown in the figure.
4.
Moreover, cut the polyester tape in the specified size and affix it.
Note:
If the width of polyester tape is not enough, use two sheets of polyester tape.
Be careful
not to touch
not to touch
Stator
Stator
Stator
Harness
(Blue)
(Blue)
Harness
(Yellow)
(Yellow)
Harness
(Black)
(Black)
Soldering
Flexible PWB
Flexible PWB
Aluminum tape
(5X40mm)
(5X40mm)
Aluminum tape
(5X40mm)
(5X40mm)
Polyester tape
(9X30mm)
(9X30mm)
Polyester tape
(9X30mm)
(9X30mm)
Polyester tape
(12X17mm)
(12X17mm)
Polyester tape
(12X17mm)
(12X17mm)
Click on the first or last page to see other SAL70200G (serv.man2) service manuals if exist.