Read Sony SAL70200G (serv.man2) Service Manual online
HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
HELP08
Adhesive bond (B-10): J-6082-612-A
1.
Route the harness leading from the flexible BL PWB and the harness leading from the stator as shown in the figure.
2.
Fix the MM PC board block with three fixing screws.
3.
After tightening the screws, apply the adhesive bond (B-10) to the heads of screws.
HELP09
Adhesive bond (B-10): J-6082-612-A
1.
Route the harness leading from the flexible BL PWB.
2.
Install the DM PC board unit and fix it with two screws.
3.
After tightening the screws, apply the adhesive bond (B-10) to the heads of screws.
4.
Solder the flexible BL PWB and zoom encoder flexible to the DM PC board unit.
Apply the adhesive bond (B-10)
MM PC Board Block
Route the harness leading
from the flexible BL PWB
as shown in the figure.
from the flexible BL PWB
as shown in the figure.
Route the harness
leading from the stator
as shown in the figure.
leading from the stator
as shown in the figure.
DM PC Board Unit
Solder the
flexible BL PWB
flexible BL PWB
Apply the adhesive bond (B-10)
Solder the zoom
encoder flexible
encoder flexible
Route the harness leading from the flexible BL PWB
as shown in the figure
as shown in the figure
Click on the first or last page to see other SAL70200G (serv.man2) service manuals if exist.