Read Sony SAL70200G (serv.man2) Service Manual online
HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
Note for assembling and grease applying positions are shown.
HELP01
Grease (G-85):
J-6082-626-A
Adhesive (Adhesive ivory white):
Note:
Use the glue (adhesive ivory white) or the equivalent
1.
Affix the tripod mount friction sheet to the tripod mount as shown in the figure.
Note:
Affix the tripod mount friction sheet, starting from the cut portion. Do not cover the cut portion with the tripod mount
friction sheet.
2.
Apply the grease (G-85) to the mating face of tripod mount knob and screw portion. Then, insert the tripod mount knob as far as it
goes to the tripod mount.
3.
After tightening the screw to the extent that the tripod mount knob comes off, turn it back half turn (Loosen).
4.
Apply the adhesive (adhesive ivory white) to the indicated portion.
Note:
It is not necessary to fill the screw hole with the adhesive. Apply the adhesive to the head of screw and hole.
HELP
Tripod Mount
Cut portion
Cut view
Cut view
Tripod Mount Friction Sheet
Apply the Grease
(G-85)
(G-85)
Apply the adhesive bond
(Adhesive ivory white)
(Adhesive ivory white)
Tripod Mount Knob
Tripod Mount
Tripod
Mount
Mount
Tripod Mount Knob
Screw
Screw
Ver. 1.3 2009.02
The changed portions from
Ver. 1.2 are shown in blue.
Click on the first or last page to see other SAL70200G (serv.man2) service manuals if exist.