Read Sony SAL55200 Service Manual online
HELP
SAL55200-2 (DT 4-5.6/55-200 SAM) (DT 55-200mm F4-5.6 SAM)
HELP02
How to remove the switch panel block (Scratch prevention)
1.
Remove two screws fixing the AF/MF switch block.
2.
Push out two screw installation parts from the inside and remove the AF/MF switch.
Note on switch panel installation
1.
Set the slide switch of gear assy to AF.
2.
Set the knob of AF/MF switch block to AF.
3.
Install the AF/MF switch block with two screws.
HELP03
Adhesive bond (LOCTITE 460)
Note:
Use the adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
1.
Apply the adhesive bond (LOCTITE 460) to the affixing side of mount index of rear barrel assy and affix the mount index.
Slide Switch
(Gear Assy)
(Gear Assy)
AF/MF Switch Block
Knob
Rear Barrel Assy
LOCTITE 460 or the equivalent
Chip (Mount Index)
Screw installation part
Click on the first or last page to see other SAL55200 service manuals if exist.