SAL50F14Z - Sony Digital Camera Service Manual (repair manual). Page 9

2-6

SAL50F14Z (Planar 1,4/50 ZA) (Planar T*50mm F1.4 ZA SSM)

1.   Stick the SSM holding sheet with the R-cut portion of the plate (pressure plate) facing down.
 

Plate (Pressure Plate)

SSM Holding Sheet

Adhesive surface

R-cut portion

Grease (FT-210): 9-913-200-37

1.   Dip the spring in grease (FT-210).
2.   Install the spring with its burr side facing down so that the ridge of the spring comes to the center of the flexible board.
 

Flexible Board

Flexible Board

Spring

Spring

Apply grease
(FT-210)

Ridge

Bond (B-10) : J-6082-612-A

1.  Install the SSM holding plate while matching its cutouts with the focus stopper pins.
2.   Turn the SSM holding plate counterclockwise about 30 degrees.

Focus Stopper Pins

about 30

SSM Holding Plate

3.   Apply bond (B-10) to fix the focus stopper pins, SSM holding plate, and straight moving barrel.
 

Focus Stopper Pin

SSM Holding 
Plate

Apply grease
(B-10)

Straight Moving 
Barrel

Grease (FT-210): 9-913-200-37

1.   Apply grease (FT-210) to the indicated portion of the front ring.
 

Apply grease
(FT-210)

Front Ring