Read Sony SAL50F14 Service Manual online
HELP
SAL50F14 (1.4/50) (50mm F1.4)
HELP04
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Don’t use what becomes white after drying like a quick-drying glue.
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40):
J-6082-614-A
1.
Apply the adhesive bond (LOCTITE 460) to the back side of the mount index, and attach it to the fixed holding tube block.
2.
Apply the anti-diffusion agent (A-20) to the instruction part of the fixed holding tube block.
3.
Attach the fixed holding tube block and the outer barrel hold plate.
4.
Apply the adhesive bond (B-40) to the three screws and tighten them as shown in the figure.
Apply the anti-diffusion
agent (A-20)
(All circumference)
agent (A-20)
(All circumference)
Fixed Holding Tube Block,
Hold Sheet and
Focus Scale Window Unit
Hold Sheet and
Focus Scale Window Unit
Apply the adhesive bond
(LOCTITE 460) (Back side)
(LOCTITE 460) (Back side)
Apply the anti-diffusion agent (A-20)
(Back side of the distance scale window assembly)
(Back side of the distance scale window assembly)
Outer Barrel Hold Plate
Apply the adhesive bond (B-40) (3 areas)
Fixed Holding Tube Block,
Hold Sheet and
Focus Scale Window Unit
Hold Sheet and
Focus Scale Window Unit
Ver. 1.3 2008.06
The changed portions from
Ver. 1.2 are shown in blue.
Ver. 1.2 are shown in blue.
Click on the first or last page to see other SAL50F14 service manuals if exist.