Read Sony SAL35F14G Service Manual online
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP08
1.
Attach the cam ring support plate to the fixed tube block, tighten the two screws.
2.
Affix the polyester tape (black) 10mm to the joint line of cam ring support plate.
3.
Affix the focus scale plate with polyester tape (black) 10mm, aligning with the punch mark on the fixed tube block.
4.
Affix of polyester tape (black) 10mm to the locations indicated in figure.
5.
Leave space 1mm between edge and adhesive sheet, affix the adhesive sheet to cam ring support plate.
Ver 1.2 2007.06
1mm
6mm
Cam Ring Support Plate
Adhesive Sheet
5 to10mm
(Width of overlapping)
Fixed Barrel Block
Adhesive Sheet
Cam Ring Support Plate
Focus Scale Plate
Fixed Barrel Block
Punch Mark
Cam Ring Support Plate
Polyester Tape (Black) 10mm
(10
(10
×
45mm)
Align with the punch mark on the
cam ring and fixed barrel.
cam ring and fixed barrel.
Sticking standard : Right edge of focus scale plate
Sticking it so that A and B may
almost become the same.
almost become the same.
Sticking standard : Center
A
B
Polyester Tape (Black) 10mm
(10
(10
×
25mm)
Polyester Tape (Black) 10mm
(10
(10
×
35mm)
Click on the first or last page to see other SAL35F14G service manuals if exist.