Read Sony SAL300F28G (serv.man3) Service Manual online
— 2 —
SAL300F28G (2.8/300 G) (300mm F2.8 G)
English
[Modification method]
Note:
When using SSM HALF COMPLETION JIG as for SAL2470Z or SAL1635Z, the three lead wires below are not used, therefore
insulate the tip of these lead wires.
1. Remove the top cover of SSM HALF COMPLETION JIG by removing four screws.
2. Connect the three lead wires to 6(GND), 7, 8Pin of USB-1208LS.
3. Organize the lead wires as shown below, and pull those out through the gap in the Encoder connector.
4. Mount the top cover of SSM HALF COMPLETION JIG by tightening up four screws.
Loose
Tighten
Click on the first or last page to see other SAL300F28G (serv.man3) service manuals if exist.