Read Sony SAL2470Z (serv.man4) Service Manual online
SERVICE MANUAL
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
Ver. 1.3 2009.03
Sony EMCS Co.
2009C0800-1
© 2009.03
Published by Kohda TEC
US Model
Canadian Model
AEP Model
Chinese Model
Japanese Model
SUPPLEMENT-2
File this supplement with the service manual.
(DI08-350)
• Change of Repair Parts
• Change of DISASSEMBLY
• Change of DISASSEMBLY
9-852-219-82
SAL2470Z
(Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
English
3.
REPAIR PARTS LIST
3-1. EXPLODED VIEWS
-
: Points changed portion.
Page
Before change
After change
3-1
3-1-1. LENS MOUNT BLOCK, 1ST LENS ASSY AND
2ND LENS ASSY
3-1-1. LENS MOUNT BLOCK, 1ST LENS ASSY AND
2ND LENS ASSY
Ref. No.
Part No.
Description
5
2-899-244-01 CAM RING LIGHT SHIELD BARREL
Ref. No.
Part No.
Description
5
2-899-244-02 CAM RING LIGHT SHIELD BARREL
[
— 2 —
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
2.
DISASSEMBLY
2-2. DETAILS
Page
Before change
After change
2-3
2-2-1. LENS MOUNT BLOCK, 1ST LENS ASSY AND 2ND LENS ASSY
2.
Tightening
(1)
If using old part (Suffix -01)
Fasten the part by hand and reverse it 5mm from the
contact point.
Apply the adhesive bond (B-10) to the two indicated
locations.
Fasten the part by hand and reverse it 5mm from the
contact point.
Apply the adhesive bond (B-10) to the two indicated
locations.
Note:
Do not fasten it until a focus cannot be
adjusted.
adjusted.
2
(See page 2-4.)
B-10
Chip-B for
universal wrench:
J-6082-609-2
universal wrench:
J-6082-609-2
Universal wrench
J-6082-609-A
J-6082-609-A
Cam Ring
Light Shield Barrel
Light Shield Barrel
Cam Ring
Light Shield Barrel
Light Shield Barrel
Cam Ring Light Shield Barrel
Drop the alcohol to
the adhesive bond
applied point.
the adhesive bond
applied point.
2-2-1. LENS MOUNT BLOCK, 1ST LENS ASSY AND 2ND LENS ASSY
1.
Disassembly method
Set the com ring light shield to 35mm zoom position and use the name ring wrench (49mm) if removing the part above.
(Name ring wrench A (49mm): J-6082-586-A)
Note:
When old parts (Suffix -01) are used: Drop the alcohol to the adhesive bond applied point.
(2)
If using new part (Suffix -02)
Fasten the part normally by hand.
(Not necessary to apply adhesive)
Fasten the part normally by hand.
(Not necessary to apply adhesive)
2
(See page 2-4.)
Cam Ring
Light Shield Barrel
Light Shield Barrel
Cam Ring Light Shield Barrel
New part: There is a slit
New part: There is a slit
2
(See page 2-4.)
B-10
Cam Ring
Light Shield Barrel
Light Shield Barrel
Cam Ring Light Shield Barrel
Old parts: There is no slit
Old parts: There is no slit
— 3 —
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
Japanese
2.
DISASSEMBLY
2-2. DETAILS
Page
変更前
変更後
2-3
2-2-1. マウント部組,1 群部組および2 群部組
2.
締め付け作業
(1)
旧部品 (末尾-01) 使用時:
手で締め込み, 当たり位置より5mm程度戻し,
指示部 2箇所にボンド(B-10)を塗布する。
手で締め込み, 当たり位置より5mm程度戻し,
指示部 2箇所にボンド(B-10)を塗布する。
注意:
フォーカスが回らなくなるまで締めこ
まないでください。
2
カム環遮光環
カム環遮光環
カム環遮光環
レンズ専用治具
J-6082-609-A
J-6082-609-A
接着剤塗布箇所に
アルコールを滴下
してください。
アルコールを滴下
してください。
レンズ専用治具
チップB:
J-6082-609-2
チップB:
J-6082-609-2
(See page 2-4.)
B-10
2-2-1. マウント部組,1 群部組および2 群部組
1.
分解方法
カム環遮光環を取り外し時は, ズーム位置を35mmに設定し, 銘板外し治具 (49mm) を使用してください。
(銘板外し治具 (49mm) :J-6082-586-A)
注意:
旧部品 (末尾-01) が使用されている場合は, 接着剤塗布箇所にアルコールを滴下してください。
(2)
新部品 (末尾-02) 使用時:
手で普通に締め込んでください。
(ボンド塗布は不要です)
手で普通に締め込んでください。
(ボンド塗布は不要です)
2
カム環遮光環
カム環遮光環
(See page 2-4.)
B-10
旧部品:スリットなし
2
カム環遮光環
カム環遮光環
(See page 2-4.)
新部品:スリットあり