Read Sony SAL24105 Service Manual online
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP17
Adhesive bond (LOCTITE 460)
Note:
Use the adhesive bond (LOCTITE 460) or the equivalent.
Do no use other adhesive bond such as the instantaneous glue that becomes whitish after dried.
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (LOCTITE 460) to the nut (B) and insert them in the specified holes of first moving frame. (Three locations)
HELP18
Adhesive bond (B-40): J-6082-614-A
1.
Align the cut portion of MF operation ring with the cut portion of torque ring by rotating the MF operation ring.
2.
Align the pinch lever (or pinch lever C) and pinch lever B with the cut portion of torque ring, and insert the pinch lever rotation shafts.
Note:
• Replace the pinch lever C, in case focus clutch mechanism runs idle the pinch lever.
• In case use pinch lever C, replace with two it.
3.
Apply the adhesive bond (B-40) to the pinch lever rotary shaft, and tighten them.
Note:
In case use pinch lever C, tip of the pinch lever rotary shaft is black.
Nut (B)
Nut (B)
Nut (B)
First Moving Frame
Apply the adhesive bond
(LOCTITE 460)
(LOCTITE 460)
Apply the adhesive bond
(LOCTITE 460)
(LOCTITE 460)
Cut Pattern
Cut Pattern
Torque Ring
MF Operation
Ring
Ring
MF Operation Ring
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Scratch Prevention Sheet
Pinch Lever B
Pinch Lever
(Pinch Lever C)
(Pinch Lever C)
Click on the first or last page to see other SAL24105 service manuals if exist.