SAL20F28 - Sony Digital Camera Service Manual (repair manual). Page 21

Read Sony SAL20F28 Service Manual online

HELP
SAL20F28 (2.8/20) (20mm F2.8)
HELP12
Adhesive bond (B-40): J-6082-614-A
1.
Install the inner tube block to the cam ring unit set so that the relationship between them meets the position as shown in the figure.
2.
Select the guide roller suitable for the width of the groove on the cam ring unit. Apply the adhesive bond (B-40) to the guide pin, and
pass the selected guide roller through the guide pin, and then tighten it. (Tighten the three guide pins into three places.)
3.
Check that the fixed cam ring rotates smoothly, and inner barrel moves smoothly.
Pin of the aperture operation plate unit
Cam Ring Unit
Inner Barrel
(
 position)
Apply the adhesive bond
 (B-40)
Inner Barrel
Cam Ring Unit
Guide Roller
Guide Pin
Apply the adhesive bond
 (B-40)
Apply the adhesive bond
(B-40)
Page of 47
Display

Click on the first or last page to see other SAL20F28 service manuals if exist.