Read Sony SAL1680Z (serv.man3) Service Manual online
— 2 —
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
HELP21
1.
Rotate fully clockwise (in the arrow direction) the focus operation ring in the outer barrel service assembly.
2.
Rotate fully clockwise (in the arrow direction) the focus lens holder in the outer tube block.
3.
Inserting the installation part of coupler in the cut portion of outer tube block, assemble the outer barrel assembly.
At this moment, insert the lever of focus operation ring in the lever groove of focus lens holder.
4.
While pushing and rotating clockwise the outer barrel assembly, tighten diagonally four screws shown in the figure.
Before change
HELP21
1.
Rotate fully clockwise (in the arrow direction 1) the focus operation ring in the outer barrel service assembly.
2.
Rotate fully clockwise (in the arrow direction 2) the focus lens holder in the outer tube block.
3.
Inserting the installation part of coupler in the cut portion of outer tube block, assemble the outer barrel assembly.
At this moment, insert the lever of focus operation ring in the lever groove of focus lens holder.
4.
While pushing and rotating clockwise (in the arrow direction 3) the outer barrel assembly and outer tube block, tighten diago-
nally four screws shown in the figure.
After change
&
: Points added portion.
)
)
)
)
AF coupler installing position
Outer Barrel Service Assy
Focus Operation Ring
Cut Portion
Focus Lens Holder
Outer Tube Block
Screw
1
3
3
2
Click on the first or last page to see other SAL1680Z (serv.man3) service manuals if exist.