Read Sony SAL14TC Service Manual online
HELP
SAL14TC (1.4x TELE CONVERTER) (1.4 X Teleconverter)
Apply the anti-diffusion agent(A-20)
(All circumference of threaded portion)
(All circumference of threaded portion)
Lens Mount Block
Stopper Screw
Apply the adhesive bond
(LOCTITE 460)
(LOCTITE 460)
1
2
4
3
Coupler Hole
HELP
Note for assembling and grease applying positions are shown.
HELP01
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to the three screws and the rear light shield barrel is installed.
HELP02
Adhesive bond (LOCTITE 460)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Don’t use what becomes white after drying like a quick-drying glue.
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the adhesive bond (LOCTITE 460) to the stopper screw and tighten it.
2.
Apply the grease (G-85) to the instruction (coupler shaft hole) part of the lens mount block.
3.
Apply the anti-diffusion (A-20) to the instruction part of the lens mount block.
4.
Four screws that installs lens mount block tighten in numerical order shown in the figure.
Apply the adhesive bond(B-40)
Rear Light Shield Barrel
Click on the first or last page to see other SAL14TC service manuals if exist.