Read Sony SAL14TC Service Manual online
4-2
SAL14TC (1.4x TELE CONVERTER) (1.4 X Teleconverter)
4-2.
PRESET LEVER POSITION CHECK AND ADJUSTMENT
This converter has the function transmitting the control of aperture to the attached lens.
Please check and adjust the preset lever when disassembling or assembling the parts related
to the position of preset (such as connect barrel, preset ring, preset lever and fixed barrel).
Equipments:
• Preset Lever adjustment jig (J-6082-639-A)
• Maximum Aperture jig (J-6082-640-A)
1. Check and adjustment
1)
Attach the jigs on the converter and set the preset lever to the open aperture position.
2)
The clearance gap of arrowed part should be 0.1mm to 0.2mm.
3)
If the clearance gap does not meet the above-mentioned value, loosen two screws
(2-687-687-01) for the preset lever B, and move the preset lever B to adjust the distance.
4)
After adjusting, apply the adhesive bond (B-10) to the screw head to fix.
Fig.4-2
Screw (2-687-687-01)
Preset lever B
Jig for adjustment
preset lever
preset lever
0.1mm to 0.2mm
Jig for maximum aperture
0.1mm to 0.2mm
Click on the first or last page to see other SAL14TC service manuals if exist.