SAL135F18Z - Sony Digital Camera Service Manual (repair manual)

Model
SAL135F18Z
Pages
79
Size
2.41 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera
File
sal135f18z.pdf
Date

View Sony SAL135F18Z Service Manual online

2-2
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
 135mm F1.8 ZA)
2-1.
DISASSEMBLY
Note 1:
Remove the filter screw frame using the filter screw frame removing tool.
Filter screw frame removing tool: J-6082-649-A
Note 2:
When removing or installing the parts of side of lens mount, install the filter screw frame to lens.
If removing or installing the parts of side of lens mount after the filter screw frame is removed, be careful to avoid damaging the 1 lens
block.
Note 3:
Remove the screw (Ref. No. 15 or 61, 2-897-949-01 screw (3ULR-F M1.7x1.6(C3C))) using the special driver.
Special driver: J-6082-654-A
Shape of head
2-3
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
 135mm F1.8 ZA)
2-1-1. OUTER BARREL BLOCK, MOUNT BLOCK AND LIGHT SHIELD RING BLOCK
EXPLODED VIEW
A
A
HELP01
HELP10
HELP10
HELP07
HELP09
HELP11
HELP02
HELP03
HELP08
HELP05
HELP04
HELP06
HELP12
(See Page 2-4.)
HELP07
8
1 Screw Filter Frame
     Assy
Function Lever
Preset Ring
!- Rear Ring Assy
9 Contact Flexible
     Guide
!= PWB Flexible Main
     Assy
2 Draw Ring Assy
3 Focus Ring
!/ Main Spring
     Guide
5 Contact Flexible
4 Ligth Shield Ring Block
6 Mount Block
![ Outer Barrel Block
7 Coupler Receive
APERTURE
DIAMETER
ADJUSTMENT
FLANGE BACK
ADJUSTMENT
TOUQUE RING PLAY
ADJUSTMENT
• In case the removing of screw filter frame assy :
  Before removing the screw filter frame assy, lubricate a small solvent (alcohol) to a gap
  between screw filter frame assy and draw ring assy, hereby dissolve the adhesive bond.
  Then remove it.
• About the screw filter frame assy :
  Be sure avoiding replacement of screw filter frame assy as far as possible. If replacement of
  it should be need, you convey the message to your user that changing of the  Carl Zeiss
  Serial No.  is needed, and then you may obtain user’s agreement, and it replace.
Note: 
2-4
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
 135mm F1.8 ZA)
2-1-2. 1, 2, 3 AND 4 LENS BLOCK
EXPLODED VIEW
A
A
B
B
C
C
HELP13
HELP15
HELP16
HELP14
HELP18
HELP17
HELP20
1 1 Lens Block
2 Ornamental 2 Sheet
4 2 Lens Blcok
5 Iris Block
PROJECTIVE RESOLVING
POWER CHECK
6 3 Lens Block
HELP19
7 4 Lens Block
PROJECTIVE RESOLVING
POWER CHECK
8 Scale Focus Sheet
3 Zoom Brush
FOCUS BRUSH
POSITION CHECK
In case the installing of 1 lens block :
Install the 1 lens block placed with same position of removing it to the length grove barrel assy.
* When removing the 1 lens block, put the marks of both the 1 lens block and length grove
   barrel assy.
Note: 
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
 135mm F1.8 ZA)
Note for assembling and grease applying positions are shown.
HELP01
Adhesive bond (B-10):
J-6082-612-A
Filter screw frame removing tool: J-6082-649-A
1.
Apply the adhesive bond (B-10) in 10mm width to the location shown in figure of draw ring assy.
2.
Aligning the inner cut portions at three locations with the guide pins, install the screw filter frame assy with the print of [1.8/135]
placed at the distance scale window side.
HELP
Draw Ring Assy
Apply the adhesive bond (B-10) 
(width 10mm)
Apply the adhesive bond (B-10) 
(width 10mm)
Screw Filter Frame Assy
Inner Cut Portions
Guide Pin
Guide Pins
Distance Scale Window
Inner Cut Portions
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
 135mm F1.8 ZA)
3.
Push the filter screw frame removing tool to the draw ring assy and rotate it counterclockwise as far as it goes and stops.
HELP02
Adhesive bond (B-40): J-6082-614-A
1.
Install the draw ring assy.
2.
Apply the adhesive bond (B-40) to the tip of three guide pins and tighten them.
Guide Pins
(Apply the adhesive bond (B-40))
Guide Pins
(Apply the adhesive bond (B-40))
Draw Ring Assy
Filter screw frame removing tool
Ver. 1.4  2007.12
The changed portions from
Ver. 1.3 are shown in blue.
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
 135mm F1.8 ZA)
Screws
(Apply the adhesive bond (B-10))
Screw
(Apply the adhesive bond (B-40))
Screws
(Apply the adhesive bond (B-40))
Preset Ring
Light Shield Ring Block
HELP03
Adhesive bond (B-10): J-6082-612-A
1.
Install the focus ring and tighten three screws to fix it.
2.
Apply the adhesive bond (B-10) to the heads of screws.
HELP04
Adhesive bond (B-40): J-6082-614-A
1.
Install the rear light shiled ring block, apply the adhesive bond (B-40) to the screws, and tighten three screws.
Note:
 Be careful not to drop screws in the lens.
2.
Confirm that the preset ring moves smoothly.
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
 135mm F1.8 ZA)
HELP05
Adhesive bond (B-40): J-6082-614-A
Install the contact flexible. Apply the adhesive bond (B-40) to the screwed portions of screws, and tighten two screws to fix the contact
flexible.
Note:
Be careful not to drop screws in the lens.
Screws
(Apply the adhesive bond (B-40)
Contact Flexible
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
 135mm F1.8 ZA)
HELP06
Grease (G-35):
J-6082-621-A
Adhesive bond (B-40): J-6082-614-A
1.
After completing the flange back adjustment, place the golden FB adjustment washer on the side of mount, and overlay the FB
adjustment washers selected in the adjustment, aligning their cut portions. Then, apply the grease (G-35) to the cut portion of washer
on the top.
2.
After inserting the shaft of coupler in the cut portion of FB adjustment washer, install it to the lens.
Note:
• Place the golden FB adjustment washer on the side of mount.
• Be careful not drop the coupler.
FB Adjustment Washer
Cut Portions
FB Adjustment Washer (Gold)
Apply the grease (G-35)
FB Adjustment Washer
Coupler
FB Adjustment Washer (Gold)
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
 135mm F1.8 ZA)
3.
Align four holes of FB adjustment washers with holes for screws.
4.
While inserting the head of coupler in the holes for coupler installation, install the mount block to the lens. Apply the adhesive bond
(B-40) to the screwed portions of screws. Then, tighten four screws to fix the mount block.
Note:
• Before installing the mount block, confirm that the white coupler receive is inserted in the hole for coupler installation.
• After tightening the screws, confirm that the coupler rotates when the focus ring is rotated.
Mount Block
Coupler
Coupler Receive
Holes for coupler installation
Screws
(Apply the adhesive bond 
(B-40))
Screws
(Apply the adhesive bond 
(B-40))
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
 135mm F1.8 ZA)
Contact Flexible Guide
Screw
(Apply the adhesive bond (B-10))
Screw
(Apply the adhesive bond (B-10))
HELP07
Adhesive bond (B-10): J-6082-612-A
1.
Install the contact flexible guide and tighten two screws to fix it.
2.
Apply the adhesive bond (B-10) to the heads of screws.
3.
Install the writing flexible of contact block to the contact board guide with two screws.
4.
Apply the adhesive bond (B-10) to the heads of screws.
Install the writing flexible
Contact Flexible Guide
Screws
(Apply the adhesive bond (B-10))

Download Sony SAL135F18Z Service Manual (Repair Manual)

Here you can view online and download Sony SAL135F18Z Service Manual in PDF. SAL135F18Z service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony SAL135F18Z Digital Camera. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.