Read Sony SAL135F18Z Service Manual online
4-19
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
2. Adjusting Method
1)
Observing the iris blades from the lens mount side, adjust the position of function lever so that the iris blades just start to be hidden
completely. Then, tighten the function lever with two screws. (Use the special driver: J-6082-654-A)
2)
Attach the contact flexible and light shield ring block.
3)
Perform “4-2-1. Aperture Diameter Check”, repeat this step until the tolerance of aperture error the specification.
4)
After finishing the adjustment, apply the adhesive bond (B-10) to the heads of two screws.
Adhesive bond (B-10): J-6082-612-A
Fig.4-2-11
5)
Remove the light shield ring block, contact flexible and Open JIG.
6)
Attach the coupler, FB adjustment washer, contact flexible and light shield ring block, assemble the state of near completion.
Apply the adhesive bond (B-10)
Click on the first or last page to see other SAL135F18Z service manuals if exist.