Read Sony SAL135F18Z Service Manual online
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
F-ECD Flexible
Gear
D2
D3
D1
HELP18
Adhesive bond (B-40): J-6082-614-A
1.
Rotate the focus 2 cam ring block so that the position of relationship between the F-ECD flexible and the gear is as shown in figure.
2.
Install the 3 group lens block to the length grove barrel assy. Apply the adhesive bond (B-40) to the screwed portions of 3-roller
screws. Then, fix the 3 group lens block with the 3 roller and the 3-roller screws at three locations.
Note:
• When assembling, do not touch the lens.
• Use the 3 roller with a play of 0 to 0.010mm with respect to the groove width of length grove barrel assy.
Part Code
Part Name
Diameter
D1
D2
D3
2-897-899-01
3 A roller
3.99
4.50
3.48
2-897-900-01
3 D roller
3.99
4.51
3.48
3.
Confirm that the focus cam 2 ring block rotates smoothly.
3 Lens Block
3 Roller (3 places)
F-ECD Flexible
Gear
3 Roller Screw
(Apply the adhesive bond (B-40) (3 places)
(Apply the adhesive bond (B-40) (3 places)
Focus 2 Cam Ring Block
Click on the first or last page to see other SAL135F18Z service manuals if exist.