Read Sony SAL135F18Z (serv.man3) Service Manual online
— 2 —
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
HELP01
Screw Filter Frame Assy
Inner Cut Portions
Guide Pin
Guide Pins
Distance Scale Window
Inner Cut Portions
2.
Aligning the inner cut portions at three locations with the guide pins, install the screw filter frame assy with the print of [1.8/135]
placed at the distance scale window side.
Before change
: Points changed portion.
&
: Points added portion.
After change
Polyester Tape (Black) 10mm
(7x13mm)
(7x13mm)
Polyester Tape (Black) 10mm
(7x13mm)
(7x13mm)
Polyester Tape (Black) 10mm
(7x13mm)
(7x13mm)
Screw Filter Frame Assy
Inner Cut Portions
Guide Pin
Guide Pins
Distance Scale Window
Inner Cut Portions
2.
Affix the polyester tape (black) 10mm cut as instructed to the location shown in figure.
Note:
Affix three sheets of polyester tape to three-divided circumferences (Center of each guide pin) of the draw ring assy.
3.
Aligning the inner cut portions at three locations with the guide pins, install the screw filter frame assy with the print of [1.8/135]
placed at the distance scale window side.
*
4.
Push the filter screw frame removing tool to the draw ring assy and rotate it counterclockwise as far as it goes and stops.
Display
