Read Sony SAL1118 Service Manual online
HELP
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
HELP03
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Grease (G-15): J-6082-619-A
1.
Apply adhesive bond ((LOCTITE 460) to the back side of the mount index mark, and attach it to the rear lens barrel assy.
2.
Apply grease (G-15) to the instruction portion of the rear lens barrel assy.
3.
Pass the flexible board through the hole on the rear lens barrel assy, and fix the rear lens barrel assy with five screws as shown in the
figure.
Apply grease (G-15) (Side edge)
Apply adhesive bond
(LOCTITE 460)
(Back side)
(LOCTITE 460)
(Back side)
Rear Lens Barrel Assy
Screws
Hole
Flexible Board
Rear Lens Barrel Assy
Click on the first or last page to see other SAL1118 service manuals if exist.