Read Sony SAL100M28 Service Manual online
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP31
Adhesive bind (B-60): J-6082-616-A
1.
Attach the insulation tape, then attach the flexible substrate setting tape B to the main flexible block.
2.
Match the hole of main flexible block to the hole of outer barrel.
3.
Attach the main flexible block in the direction of the arrow.
4.
Apply the adhesive bind (B-60) to the instruction part as shown in the figure
Note:
Do not adhere the bond (B-60) on the terminals of IC and soldering portion on each device.
In case that the bond is adhere to them, wipe out the adherent bond.
HELP32
Attach the anti refrection tape sheet as shown in the figure.
Insulation Tape (4x10 mm)
Main Flexible Block
Flexible Substrate Setting Tape B
1
Match the holes
2
Reference line
3
Reference line
Apply the adhesive bond (B-60)
(4 points)
(4 points)
Anti Refrection Tape Sheet
Reference line
Ver 1.1 2007.02
Click on the first or last page to see other SAL100M28 service manuals if exist.