NEX-FS100C, NEX-FS100CK, NEX-FS100E, NEX-FS100EK, NEX-FS100J, NEX-FS100JK, NEX-FS100N, NEX-FS100NK, NEX-FS100P, NEX-FS100PK, NEX-FS100U, NEX-FS100UK - Sony Digital Camera Service Manual (repair manual)

nex-fs100c, nex-fs100ck, nex-fs100e, nex-fs100ek, nex-fs100j, nex-fs100jk, nex-fs100n, nex-fs100nk, nex-fs100p, nex-fs100pk, nex-fs100u, nex-fs100uk service manual
Model
NEX-FS100C NEX-FS100CK NEX-FS100E NEX-FS100EK NEX-FS100J NEX-FS100JK NEX-FS100N NEX-FS100NK NEX-FS100P NEX-FS100PK NEX-FS100U NEX-FS100UK
Pages
94
Size
14.46 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera
File
nex-fs100c-nex-fs100ck-nex-fs100e-nex-fs100ek-nex-.pdf
Date

Read Sony NEX-FS100C / NEX-FS100CK / NEX-FS100E / NEX-FS100EK / NEX-FS100J / NEX-FS100JK / NEX-FS100N / NEX-FS100NK / NEX-FS100P / NEX-FS100PK / NEX-FS100U / NEX-FS100UK Service Manual online

SERVICE MANUAL
NEX-FS100C/FS100CK/FS100E/FS100EK/FS100J/FS100JK/FS100N/FS100NK/FS100P/FS100PK/FS100U/FS100UK
SERVICE NOTE (Check the following note before the service.)
Revision History
Published by Sony Techno Create Corporation
Sony Corporation
983458812.pdf
Ver. 1.1  2012.05
INTERCHANGEABLE LENS DIGITAL HD VIDEO CAMERA RECORDER
The components identified by mark 
0 or dotted line with mark 0 are 
critical for safety.
Replace only with part number 
specified.
Les composants identifiés par une 
marque 
0 sont critiques pour la 
sécurité.
Ne les remplacer que par une 
pièce portant le numéro spécifié.
9-834-588-12
US Model
Canadian Model
AEP Model
E Model
Chinese Model
Japanese Model
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
2011.05
Official Release
1.1
2012.05
Revised-1
(A1 12-050)
•  Addition of SERVICE NOTE.
 Page 
1-1
1-2
1-3
1-4
・ Correction of EXPLODED VIEWS.
 Page 
2-6
2-8
2-9
2-11
2-18
2-19
・ Correction of ACCESSORIES.
 Page 
2-20
・ Correction of ELECTRICAL PARTS LIST.
 Page 
2-24
Yes
2012E08-1
  © 2012.05
– ENGLISH –
1-1. 
POWER SUPPLY DURING REPAIRS
1-2. 
PRECAUTION ON REPLACING THE VC-618 BOARD
1-3.  
SELF-DIAGNOSIS FUNCTION
1-4.  
METHOD OF COPING WITH LENS ERROR
‒ JAPANESE ‒
1-1. 
修理時の電源供給について
1-2. 
VC-618基板交換時の注意
1-3.  
自己診断機能
1-4.  
レンズエラーの対処方法
[About the service of this model]
NEX-FS100CK/FS100EK/FS100JK/FS100NK/FS100PK/FS100UK is a commodity that packed the Interchangeable Lens 
Digital HD Video Camera Recorder (NEX-FS100C/FS100E/FS100J/FS100N/FS100P/FS100U) and Interchangeable
 Lens (E 
18-200mm F3.5-6.3 OSS).
Refer to each following service manual of the Interchangeable Lens kit, when you repair.
 Interchangeable Lens
  SEL18200 (E 18-200mm F3.5-6.3 OSS) Service Manual (9-834-507-1[])
Photo: NEX-FS100UK
NEX-FS100C/FS100CK/FS100E/FS100EK/FS100J/FS100JK/
FS100N/FS100NK/FS100P/FS100PK/FS100U/FS100UK
Revised-1
Replace the previously issued
SERVICE MANUAL 9-834-588-11
with this Manual.
– 2 –
NEX-FS100C/FS100CK/FS100E/FS100EK/FS100J/FS100JK/FS100N/FS100NK/FS100P/FS100PK/FS100U/FS100UK
SPECIFICATIONS
System
Video signal
 
PAL color, CCIR standards
 
HDTV 1080/50i, 1080/50p, 720/50p
 specification
Video recording system
 
HD image quality: MPEG-4 AVC/
 
H.264 AVCHD format compatible
 
(1080/50p: original format)
 
SD image quality: MPEG-2 PS
Audio recording system
 
Linear PCM 2ch (48 kHz 16-bit)
 
Dolby Digital 2ch (48 kHz 16-bit)
 
Dolby Digital Stereo Creator employed
Still image recording system
 
DCF Ver. 2.0 Compatible
 
Exif Ver. 2.3 Compatible
 
MPF Baseline Compatible
Recording media (movies/still images)
“Memory Stick PRO Duo” media
Flash memory units
SD card (Class 4 or faster)
Image device
 
“Exmor” Super35 CMOS sensor
 
23.6 mm × 13.3 mm (Ø 27.1 mm)
 
Gross: Approx. 3 530 000 pixels
 
Effective (movie, 16:9):
 
Approx. 3 370 000 pixels
 
Effective (movie, 4:3):
 
Approx. 2 530 000 pixels
Color temperature
 [AUTO]
 
 (one push) A/B
 
[INDOOR] (3 200K)
 
[OUTDOOR] (5 800K)
Minimum illumination
 
1.5 lx (lux) with Shutter Speed 1/25,
 
auto gain control, auto iris (using the E
 
18-200 mm F3.5-6.3 OSS lens*)
*  Supplied with NEX-FS100EK/FS100PK
Input/output connectors
VIDEO OUT jack
 Pin 
connector
 Video 
output
 1 
Vp-p, 
75 
Ω (ohms) unbalanced, sync
 negative
AUDIO OUT jacks
 Pin 
connectors
 
-10 dBu (at load impedance 47 kΩ
 
(kilohms)), Output impedance with less
 
than 2.2 kΩ (kilohms)
 
(0 dBu = 0.775 Vrms)
COMPONENT OUT jack
 Mini-D 
jack
 
Y: 1 Vp-p, 75 Ω (ohms)
 
P
B
/P
R
, C
B
/C
R
: 0.7 Vp-p, 75 Ω (ohms)
REMOTE jack
 
Stereo mini-minijack (Ø 2.5 mm)
HDMI OUT jack
 
HDMI Connector (Type A)
USB jack
 mini-AB
i
 (headphones) jack
 
Stereo minijack (Ø 3.5 mm)
INPUT1/INPUT2 jacks
 
XLR 3-pin, female,
 
MIC: -48 dBu/3 kΩ (kilohms)
 
LINE: +4 dBu/10 kΩ (kilohms)
 
(0 dBu = 0.775 Vrms)
LCD screen
Picture
 
8.8 cm (3.5 type, aspect ratio 16:9)
Total dot number
 
921 600 (1 920 × 480)
General
Power requirements
 
DC 7.2 V (battery pack)
 
DC 8.4 V (AC Adaptor/Charger)
Average power consumption
 
During camera recording using the
 
microphone ECM-XM1, LCD with
 
normal brightness (using the E 18-200
 
mm F3.5-6.3 OSS lens*)
 5.6 
W
 
When Flash Memory Unit HXRFMU128
 
is used, the average power
 
consumption increases about 1.1 W.
Operating temperature
 
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
 
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
 
Camcorder body only (including the
 projecting 
parts):
 
126.5 mm × 101.5 mm × 193.5 mm
 
(5 in. × 4 in. × 7 5/8 in.) (w/h/d)
 
When recording (including the
 projecting 
parts):
 
178 mm × 192 mm × 519.5 mm
 
(7 1/8 in. × 7 5/8 in. × 20 1/2 in.) (w/h/
 
d) (With the accessories (lens*, lens
 
hood*, large LCD viewfinder, large
 
eyecup, handle, microphone (ECMXM1),
 
and grip (without the belt)
 attached.)
Mass (approx.)
 
Camcorder body only:
 
1 040 g (2 lb 4 oz)
 When 
recording:
 
2 660 g (5 lb 13 oz) (With the
 
accessories (battery pack (NP-F770),
 
lens*, lens hood*, large LCD
 
viewfinder, large eyecup, handle,
 
microphone (ECM-XM1), grip, and
 
flash memory unit cover attached.)
* Supplied with NEX-FS100EK/FS100PK
AC Adaptor/Charger AC-VL1
Power requirements
 
AC 100 V - 240 V, 50 Hz/60 Hz
Power consumption
 22 
W
Output voltage
 DC 
8.4 
V*
Operating temperature
 
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
 
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
 
136 mm × 51 mm × 90 mm
 
(5 3/8 in. × 2 1/8 in. × 3 5/8 in.) (w/h/d)
 
excluding the projecting parts
Mass (approx.)
 
270 g (9.6 oz) excluding the power cord
 (mains 
lead)
*  See the label on the AC Adaptor/Charger for 
other specifications.
Rechargeable battery pack NP-F770
Maximum output voltage
 DC 
8.4 
V
Output voltage
 DC 
7.2 
V
Maximum charge voltage
 DC 
8.4 
V
Maximum charge current
 3.0 
A
Capacity
 
Typical: 31.7 Wh (4 400 mAh)
 
Minimum: 30.0 Wh (4 200 mAh)
Type
 Li-ion
E 18-200 mm F3.5-6.3 OSS lens
(Supplied with NEX-FS100EK/
FS100PK)
Lens
 E-mount 
lens
When converted to a 35 mm still camera
 
28.8 mm - 320 mm (1 3/16 in. -
 
12 5/8 in.) (16:9)
 
36 mm - 400 mm (1 7/16 in. -
 
15 3/4 in.) (4:3)
F-value
 F3.5-F6.3
SteadyShot
 
Optical-shift biaxial-linear-drive and
 
hall effect sensor
Minimum focus*
 
0.30 m (W) - 0.50 m (T) (11 7/8 in. -
 
19 3/4 in.)
Maximum magnification
 ×0.35
Minimum f-stop
 
f/22 - f/40
Filter diameter
 
67 mm (2 3/4 in.)
Dimensions (approx. max. diameter ×
height)
 
75.5 mm × 99.0 mm (3 in. × 4 in.)
Mass (approx.)
 
524 g (18 1/2 oz.)
*  Minimum focus is the shortest distance from the 
image sensor to the subject.
Design and specifications are subject to change
without notice.
•  Manufactured under license from Dolby 
Laboratories.
– ENGLISH –
These specifications are extracted from instruction manual of
NEX-FS100E/FS100P/FS100EK/FS100PK.
These specifications are extracted from instruction manual of
NEX-FS100U/FS100N/FS100UK/FS100NK.
SPECIFICATIONS
System
Video signal
 
NTSC color, EIA standards
 
HDTV 1080/60i, 1080/60p, 720/60p
 specification
Video recording system
 
HD image quality: MPEG-4 AVC/
 
H.264 AVCHD format compatible
 
(1080/60p: original format)
 
SD image quality: MPEG-2 PS
Audio recording system
 
Linear PCM 2ch (48 kHz 16-bit)
 
Dolby Digital 2ch (48 kHz 16-bit)
 
Dolby Digital Stereo Creator employed
Still image recording system
 
DCF Ver. 2.0 Compatible
 
Exif Ver. 2.3 Compatible
 
MPF Baseline Compatible
Recording media (movies/still images)
 
“Memory Stick PRO Duo” media
 
Flash memory units
 
SD card (Class 4 or faster)
Image device
 
“Exmor” Super35 CMOS sensor
 
23.6 mm × 13.3 mm (Ø 27.1 mm)
 
Gross: Approx. 3 530 000 pixels
 
Effective (movie, 16:9):
 
Approx. 3 370 000 pixels
 
Effective (movie, 4:3):
 
Approx. 2 530 000 pixels
Color temperature
 [AUTO]
 
 (one push) A/B
 
[INDOOR] (3 200K)
 
[OUTDOOR] (5 800K)
Minimum illumination
 
1.2 lx (lux) with Shutter Speed 1/24,
 
1.5 lx (lux) with Shutter Speed 1/30,
 
auto gain control, auto iris (using the E
 
18-200 mm F3.5-6.3 OSS lens*)
* Supplied with NEX-FS100UK/FS100NK
Input/output connectors
VIDEO OUT jack
 Pin 
connector
 Video 
output
 1 
Vp-p, 
75 
Ω (ohms) unbalanced, sync
 negative
AUDIO OUT jacks
 Pin 
connectors
 
-10 dBu (at load impedance 47 kΩ
 
(kilohms)), Output impedance with less
 
than 2.2 kΩ (kilohms)
 
(0 dBu = 0.775 Vrms)
COMPONENT OUT jack
 Mini-D 
jack
 
Y: 1 Vp-p, 75 Ω (ohms)
 
P
B
/P
R
, C
B
/C
R
: 0.7 Vp-p, 75 Ω (ohms)
REMOTE jack
 
Stereo mini-minijack (Ø 2.5 mm)
HDMI OUT jack
 
HDMI Connector (Type A)
USB jack
 mini-AB
i
 (headphones) jack
 
Stereo minijack (Ø 3.5 mm)
INPUT1/INPUT2 jacks
 
XLR 3-pin, female,
 
MIC: -48 dBu/3 kΩ (kilohms)
 
LINE: +4 dBu/10 kΩ (kilohms)
 
(0 dBu = 0.775 Vrms)
LCD screen
Picture
 
8.8 cm (3.5 type, aspect ratio 16:9)
Total dot number
 
921 600 (1 920 × 480)
General
Power requirements
 
DC 7.2 V (battery pack)
 
DC 8.4 V (AC Adaptor/Charger)
Average power consumption
 
During camera recording using the
 
microphone ECM-XM1, LCD with
 
normal brightness (using the E 18-200
 
mm F3.5-6.3 OSS lens*)
 5.6 
W
 
When Flash Memory Unit HXRFMU128
 
is used, the average power
 
consumption increases about 1.1 W.
Operating temperature
 
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
 
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
 
Camcorder body only (including the
 projecting 
parts):
 
126.5 mm × 101.5 mm × 193.5 mm
 
(5 in. × 4 in. × 7 5/8 in.) (w/h/d)
 
When recording (including the
 projecting 
parts):
 
178 mm × 192 mm × 519.5 mm
 
(7 1/8 in. × 7 5/8 in. × 20 1/2 in.) (w/h/
 
d) (With the accessories (lens*, lens
 
hood*, large LCD viewfinder, large
 
eyecup, handle, microphone (ECMXM1),
 
and grip (without the belt)
 attached.)
Mass (approx.)
 
Camcorder body only:
 
1 040 g (2 lb 4 oz)
 When 
recording:
 
2 660 g (5 lb 13 oz) (With the
 
accessories (battery pack (NP-F770),
 
lens*, lens hood*, large LCD
 
viewfinder, large eyecup, handle,
 
microphone (ECM-XM1), grip, and
 
flash memory unit cover attached.)
* Supplied with NEX-FS100UK/FS100NK
AC Adaptor/Charger AC-VL1
Power requirements
 
AC 100 V - 240 V, 50 Hz/60 Hz
Power consumption
 22 
W
Output voltage
 DC 
8.4 
V*
Operating temperature
 
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
 
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
 
136 × 51 × 90 mm
 
(5 3/8 × 2 1/8 × 3 5/8 in.) (w/h/d)
 
excluding the projecting parts
Mass (approx.)
 
270 g (9.6 oz) excluding the power cord
 (mains 
lead)
*  See the label on the AC Adaptor/Charger for 
other specifications.
Rechargeable battery pack NP-F770
Maximum output voltage
 DC 
8.4 
V
Output voltage
 DC 
7.2 
V
Maximum charge voltage
 DC 
8.4 
V
Maximum charge current
 3.0 
A
Capacity
 
Typical: 31.7 Wh (4 400 mAh)
 
Minimum: 30.0 Wh (4 200 mAh)
Type
 Li-ion
E 18-200 mm F3.5-6.3 OSS lens
(Supplied with NEX-FS100UK/
FS100NK)
Lens
 E-mount 
lens
When converted to a 35 mm still camera
 
28.8 mm - 320 mm (1 3/16 in. -
 
12 5/8 in.) (16:9)
 
36 mm - 400 mm (1 7/16 in. -
 
15 3/4 in.) (4:3)
F-value
 F3.5-F6.3
SteadyShot
 
Optical-shift biaxial-linear-drive and
 
hall effect sensor
Minimum focus*
 
0.30 m (W) - 0.50 m (T) (11 7/8 in. -
 
19 3/4 in.)
Maximum magnification
 ×0.35
Minimum f-stop
 
f/22 - f/40
Filter diameter
 
67 mm (2 3/4 in.)
Dimensions (approx. max. diameter ×
height)
 
75.5 mm × 99.0 mm (3 in. × 4 in.)
Mass (approx.)
 
524 g (18 1/2 oz.)
*  Minimum focus is the shortest distance from the 
image sensor to the subject.
Design and specifications are subject to change
without notice.
•  Manufactured under license from Dolby
Laboratories.
– ENGLISH –
– 3 –
NEX-FS100C/FS100CK/FS100E/FS100EK/FS100J/FS100JK/FS100N/FS100NK/FS100P/FS100PK/FS100U/FS100UK
概略仕様
システム
信号方式
 NTSC
カラー、
EIA
標準方式
 HDTV 
1080/60i
1080/60p
 720/60p
方式
ビデオ記録方式
 HD
画質:
MPEG-4 AVC/H.264
 AVCHD
規格準拠(
1080/60p:
 
 
自規格)
 SD
画質:
MPEG-2 PS
音声記録方式
 
リニア
PCM 2ch
48kHz 16bit
 Dolby 
Digital 
2ch
48kHz
 16bit
 
ドルビーデジタルステレオクリ
 
エーター搭載
静止画ファイルフォーマット
 DCF 
Ver.2.0
準拠
 Exif 
Ver.2.3
準拠
 MPF 
Baseline
準拠
記録メディア(動画・静止画)
 
“メモリースティック
 PRO 
デュ
 
オ”
 
フラッシュメモリーユニット
 SD
カード(
Class 4
以上)
撮像素子
 
Exmor
 Super35 CMOS
セン
 
サー
 23.6mm
×
13.3mm (
対角
 27.1mm
 
総画素数:約
353
万画素
 
動画時有効画素数(
16
9
モー
 
ド):約
337
万画素
 
動画時有効画素数(
4
3
モード):
 
253
万画素
色温度切り換え
 
オート
 
ワンプッシュ(
A, B
 
屋内(
3 200K
 
屋外(
5 800K
最低被写体照度
 1.5 
lx
 
ルクス)
 
シャッタースピード固定(
1/30
 
オートゲインコントロール、アイ
 
リスオート(
E 18-200 mm F3.5-
 6.3 
OSS*
使用時)
* NEX-FS100JK 
に付属
入/出力端子
VIDEO OUT
端子
 
ピンジャック
 1Vp-p
75
Ω不平衡、同期負
AUDIO OUT
端子
 
ピンジャック
 -10dBu
47k
Ω負荷時)、
 
出力インピーダンス
2.2k
Ω以下
 
0dBu=0.775Vrms
COMPONENT OUT
端子
 
ミニ
D
端子
 
Y
1Vp-p
75
Ω
 
P
B
/P
R
. C
B
/C
R
0.7Vp-p
75
Ω
リモート端子
 
ステレオミニミニジャック
 
(Φ
2.5mm
HDMI OUT
端子
 HDMI
コネクター(タイプ
A
USB
端子
 mini-AB
i
(ヘッドホン)端子
 
ステレオミニジャック
 
(Φ
3.5mm
INPUT1/INPUT2
端子
 XLR
3
ピン×
2
、凹
 MIC
-48dBu
3k
Ω
 LINE
+4dBu
10k
Ω
 
0dBu=0.775Vrms
液晶画面
画面サイズ
 8.8cm
3.5
型、アスペクト比
 16:9
総ドット数
 921 
600
ドット
 
1 920
×縦
480
電源部、その他
電源電圧
 DC7.2V
(バッテリーパック使用時)
 DC8.4V
AC
アダプター
/
チャー
 
ジャー使用時)
消費電力
 
マイク(
ECM-XM1
)、液晶画面使
 
用時、明るさ標準、
E 18-200 mm
 F3.5-6.3 
OSS*
使用時:
 5.6W
 
フラッシュメモリーユニット
 HXR-FMU128
使用時は、消費電
 
力が約
1.1W
増えます。
動作温度
 
0
℃∼
40
保存温度
 
20
℃∼
+60
本体外形寸法(突起部含む)
 
126.5mm
×
101.5mm
×
 193.5mm
(幅×高さ×奥行き)
撮影時外形寸法(突起部含む)
 
178mm
×
192mm
×
 519.5mm
(幅×高さ×奥行き)
 
(レンズ
*
、レンズフード
*
、ビュー
 
ファインダー、大型アイカップ、
 
ハンドル、マイク(
ECM-XM1
)、
 
グリップ(ベルト無し)含む)
本体質量約
 1 
040g
撮影時総質量
 
2 660g
 
(バッテリーパック(
NP-F770
)、
 
レンズ
*
、レンズフード
*
、ビュー
 
ファインダー、大型アイカップ、
 
ハンドル、マイク(
ECM-XM1
)、
 
グリップ(ベルト無し)含む)
* NEX-FS100JK 
に付属
E 18-200 mm F3.5-6.3 OSS
(NEX-FS100JKに付属)
レンズ
 
E
マウントレンズ
35mm
カメラ換算
 
動画撮影時(
16:9
):
28.8mm -
 320mm
 
動画撮影時(
4:3
):
36mm -
 400mm
F
 F3.5-F6.3
手ブレ補正
 
光学シフト
2
実リニア駆動+ホー
 
ル素子
最短撮影距離
*
 
0.30m (W) - 0.50m (T)
最大撮影倍率
 0.35
最小絞り
 
f/22 - f/40
フィルター径
 67mm
外形寸法(最大径×長さ)
 
75.5mm
×
99.0mm
質量
 
524
*  
最短撮影距離とは、イメージセンター面から被写体
までの最短距離を表します。
本機の仕様および外観は、改良のため予告なく変
更することがありますが、ご了承ください。
•  
ドルビーラボラトリーズからの実施権に基づき製造
されています。
Model information table
Model
FS100C
FS100CK
FS100E
FS100EK
FS100J
FS100JK
Destination
CH
CH
AEP
AEP
J
J
Color system
PAL
PAL
PAL
PAL
NTSC
NTSC
Lens
E 18-200 mm 
F3.5-6.3 OSS
E 18-200 mm 
F3.5-6.3 OSS
E 18-200 mm 
F3.5-6.3 OSS
Model
FS100N
FS100NK
FS100P
FS100PK
FS100U
FS100UK
Destination
E
E
E
E
US, CND
US, CND
Color system
NTSC
NTSC
PAL
PAL
NTSC
NTSC
Lens
E 18-200 mm 
F3.5-6.3 OSS
E 18-200 mm 
F3.5-6.3 OSS
E 18-200 mm 
F3.5-6.3 OSS
・ Abbreviation
 CH 
  : 
Chinese 
model
  CND   : Canadian model
  J  
: Japanese model
– JAPANESE –
– 4 –
NEX-FS100C/FS100CK/FS100E/FS100EK/FS100J/FS100JK/FS100N/FS100NK/FS100P/FS100PK/FS100U/FS100UK
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH 
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST 
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS 
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY 
SONY. 
ATTENTION AU  COMPOSANT  AYANT  RAPPORT 
À  LA  SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES 
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT 
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT 
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES 
SUPPLÉMENTS PUBLIÉS PAR SONY.
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
注意
電池の交換は,正しく行わないと破裂する恐れがあります。
電池を交換する場合には必ず同じ型名の電池又は同等品と
交換してください。
使用済み電池は,取扱指示に従って処分してください。
SAFETY  CHECK-OUT
After correcting the original service problem, perform the following 
safety checks before releasing the set to the customer.
1.  Check the area of your repair for unsoldered or poorly-soldered 
connections. Check the entire board surface for solder splashes and 
bridges.
2.  Check the interboard wiring to ensure that no wires are “pinched” 
or contact high-wattage resistors.
3.  Look for unauthorized replacement parts, particularly transistors, 
that were installed during a previous repair. Point them out to the 
customer and recommend their replacement.
4.  Look for parts which, through functioning, show obvious signs of 
deterioration. Point them out to the customer and recommend their 
replacement.
5.  Check the B+ voltage to see it is at the values specified.
6.  Flexible Circuit Board Repairing
•  Set the soldering iron tip temperature to 350 °C approximately.
•  Do not touch the soldering iron on the same conductor of the circuit 
board (within 3 times).
•  Be careful not to apply force on the conductor when soldering or 
unsoldering.
1.  注意事項をお守りください。
 
サービスのとき特に注意を要する個所については,キャビ
ネット,シャーシ,部品などにラベルや捺印で注意事項を
表示しています。これらの注意書き及び取扱説明書等の注
意事項を必ずお守り下さい。
2.  指定部品のご使用を
 
セットの部品は難燃性や耐電圧など安全上の特性を持った
ものとなっています。従って交換部品は,使用されていた
ものと同じ特性の部品を使用して下さい。特に回路図,部
品表に0印で指定されている安全上重要な部品は必ず指定
のものをご使用下さい。
3.  部品の取付けや配線の引きまわしはもとどおりに
 
安全上,チューブやテープなどの絶縁材料を使用したり,
プリント基板から浮かして取付けた部品があります。また
内部配線は引きまわしやクランパによって発熱部品や高圧
部品に接近しないよう配慮されていますので,これらは必
ずもとどおりにして下さい。
4.  サービス後は安全点検を
 
サービスのために取外したネジ,部品,配線がもとどおり
になっているか,またサービスした個所の周辺を劣化させ
てしまったところがないかなどを点検し,安全性が確保さ
れていることを確認して下さい。
5.  チップ部品交換時の注意
 
・ 取外した部品は再使用しないで下さい。
 
・ タンタルコンデンサのマイナス側は熱に弱いため交換時
は注意して下さい。
6.  フレキシブルプリント基板の取扱いについて
 
・ 半田こてのこて先温度は約350℃に設定してください。
 
・ 同一パターンに何度もコテ先を当てないで下さい。(3回
以内)
 
・ パターンに力が加わらないよう注意して下さい。
サービス,点検時には次のことにご注意ください。
– ENGLISH –
– JAPANESE –
UNLEADED SOLDER
This unit uses unleaded solder.
Boards requiring use of unleaded solder are printed with the lead free 
mark (LF) indicating the solder contains no lead.
(Caution:  Some printed circuit boards may not come printed with the 
lead free mark due to their particular size.)
: LEAD FREE MARK
Be careful to the following points to solder or unsolder.
•   Set the soldering iron tip temperature to 350 °C approximately. 
If cannot control temperature, solder/unsolder at high temperature 
for a short time.
Caution:  The printed pattern (copper foil) may peel away if the 
heated tip is applied for too long, so be careful!  
Unleaded solder is more viscous (sticky, less prone to 
flow) than ordinary solder so use caution not to let solder 
bridges occur such as on IC pins, etc.
•   Be sure to control soldering iron tips used for unleaded solder and 
those for leaded solder so they are managed separately. Mixing un-
leaded solder and leaded solder will cause detachment phenomenon.
無鉛半田について
本機には無鉛半田が使用されています。
無鉛半田を使用している基板には,無鉛(Lead Free)を意味する
レッドフリーマークがプリントされています。
(注意: 基板サイズによっては,無鉛半田を使用していてもレッ
ドフリーマークがプリントされていないものがありま
す)
:レッドフリーマーク
無鉛半田は,下記の点に注意して使用してください。
・  半田こてのこて先温度は約350℃に設定してください。
温度調節が無理な場合は,高温短時間で作業を行ってくだ
さい。
注意:  半田こてを長く当てすぎると,基板のパターン(銅
箔)がはがれてしまうことがありますので,注意して
ください。また,従来の半田よりも粘性が強いため,
IC端子などが半田ブリッジしないように注意してく
ださい。
・  半田こてのこて先は,必ず無鉛半田用と有鉛半田用に分け
て管理してください。
無鉛半田と有鉛半田が混在すると剥離現象が発生してしま
います。
CHEMICALS
Some chemicals used for servicing are highly volatile.
Their evaporation caused by improper management affects your health
and environment, and wastes resources.
Manage the chemicals carefully as follows.
•  Store chemicals sealed in a specific place to prevent from exposure to 
high temperature or direct sunlight.
•  Avoid dividing chemicals into excessive numbers of small containers 
to reduce natural evaporation.
•  Keep containers sealed to avoid natural evaporation when chemicals 
are not in use.
•  Avoid using chemicals as much as possible. When using chemicals, 
divide only required amount to a small plate from the container and 
use up it.
PLASTIC PARTS
Be careful to the following points for plastic parts used in this unit.
•  Use a piece of cleaning paper or cleaning cloth for cleaning plastic 
parts. Avoid using chemicals.
  Even if you have to use chemicals to clean heavy dirt, don’t use paint 
thinner, ketone, nor alcohol.
•  Insert the specific screws vertically to the part when installing a plastic 
part.
  Be careful not to tighten screws too much.
各種薬品の取り扱いについて
現在使用されている薬品の中には揮発性の高い薬品もありま
す。
それらを不用意に取り扱い蒸発させてしまうと,環境や健康へ
影響を与えたり,資源の無駄使いになります。
各種薬品は,下記の点に注意して取り扱ってください。
・ 保管場所を定め,高温になったり直射日光の当たらない場所
に密閉して保管してください。
・ 小分け(ハンドラップ等)する数は必要最小限に留め,容器に
よる自然蒸発を防いでください。
・ 作業に使用しない時は,必ずキャップ等をして自然蒸発を防
いでください。
・ 薬品を使用する回数を極力少なくし,使用する場合は使用す
る量だけ容器より出して受け皿に残さないようにしてくださ
い。
樹脂系部品の取り扱いについて
本機に使用されている樹脂系の部品は,下記の点に注意して取
り扱ってください。
・ 清掃には薬品を使用せず,清掃紙や清掃布を使用してくださ
い。
  やむを得ず汚れがひどくて薬品を使用する場合は,シンナー,
ケトン,エーテルは使用しないでください。
・ 各部品の取り付けには指定されたねじを使用し,部品に対し
て垂直に取り付けてください。
  また,ねじを締め付ける時は,無理な力を加えないでくださ
い。
Page of 94
Display

Download Sony NEX-FS100C / NEX-FS100CK / NEX-FS100E / NEX-FS100EK / NEX-FS100J / NEX-FS100JK / NEX-FS100N / NEX-FS100NK / NEX-FS100P / NEX-FS100PK / NEX-FS100U / NEX-FS100UK Service Manual (Repair Manual)

Here you can read online and download Sony NEX-FS100C / NEX-FS100CK / NEX-FS100E / NEX-FS100EK / NEX-FS100J / NEX-FS100JK / NEX-FS100N / NEX-FS100NK / NEX-FS100P / NEX-FS100PK / NEX-FS100U / NEX-FS100UK Service Manual in PDF. NEX-FS100C / NEX-FS100CK / NEX-FS100E / NEX-FS100EK / NEX-FS100J / NEX-FS100JK / NEX-FS100N / NEX-FS100NK / NEX-FS100P / NEX-FS100PK / NEX-FS100U / NEX-FS100UK service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony NEX-FS100C / NEX-FS100CK / NEX-FS100E / NEX-FS100EK / NEX-FS100J / NEX-FS100JK / NEX-FS100N / NEX-FS100NK / NEX-FS100P / NEX-FS100PK / NEX-FS100U / NEX-FS100UK Digital Camera. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.