Read Sony NEX-5T / NEX-5TL / NEX-5TY (serv.man2) Service Manual online
NEX-5T/5TL/5TY_L2
3-2
3
Install the LC Hinge Holder (L) and LC Flexible
Retainer.
Retainer.
4
Connect the LC-1001 flexible board to the LC-1003
board.
And attach the adhesive part of the LC-1001 Flexible
Board.
board.
And attach the adhesive part of the LC-1001 Flexible
Board.
Adhesive part
LC Hinge Holder (L) and
LC Flexible Retainer
LC Flexible Retainer
5
Attach the LC Light Interception Sheet.
LC Light Interception Sheet
Adhesive part
6
Roll the LC-1001 flexible board 2 times in the Main
Frame to the as shown in figure.
And attach the adhesive part of the LC-1001 Flexible
Board.
Frame to the as shown in figure.
And attach the adhesive part of the LC-1001 Flexible
Board.
3-2. CLEANING PROCEDURE OF OLPF
<Preparation for Remedy>
If you use the new Jig (J-6082-663-A) below, make sure to clean the CCD Cleaning Jig (Tip) below before using, please.
If you use the new Jig (J-6082-663-A) below, make sure to clean the CCD Cleaning Jig (Tip) below before using, please.
Note: Protection sheet is for preventing the scratch of a surface on the Jig (Tip).
The protection sheet may be come off the Jig when you take the Jig from a bag, but it is no problem.
CCD Cleaning Jig (New)
(J-6082-663-A)
(J-6082-663-A)
CCD Cleaning Jig
CCD Cleaning Jig (Tip)
Protection Sheet
<Cleaning Procedure for Tip of CCD Cleaning Jig>
1. Put the two cleaning cloths on a tray like below.
1. Put the two cleaning cloths on a tray like below.
1
Souse the one cleaning cloth in ethyl alcohol.
2
Put the other cleaning cloth on a tray as it is dry.
2. Dab the tip of CCD cleaning jig at the cleaning cloth of 1 5 or 6 times.
* Do not slide the tip from right to left or up and down while dabbing.
3. Dab the tip of CCD cleaning jig at the cleaning cloth of 2 5 or 6 times.
* Do not slide from right to left or up and down while dabbing.
4. Wait until the tip will be dried completely.
1
Souse the cleaning
cloth in ethyl alcohol.
cloth in ethyl alcohol.
2
The dry cleaning cloth.
Click on the first or last page to see other NEX-5T / NEX-5TL / NEX-5TY (serv.man2) service manuals if exist.