Read Sony NEX-3NL / NEX-3NY Service Manual online
NEX-3NL/3NY_L2
2-5
2-1-3. BT SECTION
ns: not supplied
DISASSEMBLY
1. Remove in numerical order (
1
to
4
) in the left figure.
2. The meaning of the symbol in left figure is as follows. Be careful when you remove it.
◇
-X: Solder
2
#64 X 1
Screw
#64
Back View
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
101
A-1923-296-A ST-1008 FLEXIBLE BOARD, COMPLETE (Note 2, 3)
102
X-2586-608-1 BASE (MAIN) ASSY (BK (762)) (BLACK)
102
X-2586-617-1 BASE (MAIN) ASSY (WH (762)) (WHITE)
102
X-2586-618-1 BASE (MAIN) ASSY (PI (762)) (PINK)
103
4-456-090-01
SPRING (BT DISCHARGE) (762)
104
X-2586-623-1 HOOK (L) ASSY (762), STRAP
105
4-456-089-01
PLATE (FRONT) (762) (Note 4)
106
1-887-267-11
IS-1006 FLEXIBLE BOARD
107
1-885-294-11
IS-105 FLEXIBLE BOARD
108
X-2586-606-1 CABINET (FRONT) ASSY BK (762) (BLACK)
108
X-2586-611-1
CABINET (FRONT) ASSY WH (762) (WHITE)
108
X-2586-612-1 CABINET (FRONT) ASSY PI (762) (PINK)
109
4-186-543-01
PLATE, LOGO (BLACK)
109
4-186-543-71
PLATE, LOGO (WHITE)
109
4-186-543-81
PLATE, LOGO (PINK)
110
4-456-085-01
GRIP (FRONT) (762) (BLACK)
110
4-456-085-11
GRIP (FRONT) (762) (WHITE)
110
4-456-085-21
GRIP (FRONT) (762) (PINK)
111
A-1934-236-A RL-1008 FLEXIBLE BOARD, COMPLETE (SERVICE)
BH001
1-251-928-21
SOCKET, BATTERY (Note 1)
BT001
1-756-134-15
BATTERY, LITHIUM (SECONDARY) (Note 1)
C901
1-118-487-11
CAP, ALUMINIUM ELECT 46uF 330V
#64
2-666-551-21 SCREW,
TAPPING,
P2
#64: M1.7 X 5.0 (Tapping)
(Silver)
2-666-551-21
2-666-551-21
5.0
1.7
A
A
C901
BH001
(Note 1)
(Note 1)
BT001
(Note 1)
(Note 1)
101
(Note 2, 3)
106
107
103
108
111
109
110
2
104
3
105
(Note 4)
1
102
4
ns
ns
Imager Block Section
(See page 2-6)
#64
#64
#64
(Claw)
OFF position
(Claws)
: BT001 (LITHIUM RECHARGEABLE BATTERY)
Board on the mount position.
(See page 6-28 of Level 3)
Board on the mount position.
(See page 6-28 of Level 3)
3
#64 X 5
#64
Back View
4
Remove the Imager
Block Section
Note
Note 1: Replace the battery holder (BH001) together when replac-
ing the lithium storage battery (BT001) on the RL-1008
board.
board.
(The battery holder removed once cannot be used again.)
When mounting these parts, mount new battery holder first
and attach new lithium storage battery next.
and attach new lithium storage battery next.
Note 1: RL-1008基板のリチウム蓄電池 (BT001) を交換する場合は
バッテリホルダ (BH001) も同時に新品に交換してください。
(一度使用したバッテリホルダは再使用できません。)
部品取り付けの際は，先にバッテリホルダを取り付けてから
リチウム蓄電池を装着してください。
Note 2: Refer to “Assembly-1: Installation Method of ST-1008 Flex-
ible Board.” when you assemble.
Note 2: 組立時は Assembly-1: Installation Method of ST-1008 Flexi-
ble Board. を参照してください。
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
注意
電池の交換は，正しく行わないと破裂する恐れがあります。
電池を交換する場合には必ず同じ型名の電池又は同等品と交換して
ください。
使用済み電池は，取扱指示に従って処分してください
電池を交換する場合には必ず同じ型名の電池又は同等品と交換して
ください。
使用済み電池は，取扱指示に従って処分してください
Note 3: • When installing the ST-1008 Flexible Board, fold it in cor-
rect direction.
For how to fold the ST-1008 Flexible Board, refer to “As-
sembly-1: Installation Method of ST-1008 Flexible Board.”.
• If the ST-1008 Flexible Board is folded in incorrect direc-
tion, replace it with a new one.
Re-folding the incorrectly folded ST-1008 Flexible Board
in opposite direction may cause disconnection of the Flex-
ible Board.
ible Board.
Note 3: ・ ST-1008フレキシブル基板の取り付け時，折り目の方向を
間違えないように注意してください。
折り目の付け方については Assembly-1: Installation Meth-
od of ST-1008 Flexible Board. を参照してください。
・ もし間違った方向に折ってしまった場合は，新品のST-
1008フレキシブル基板に交換してください。
間違えて折り目を付けてしまったフレキシブル基板を逆
方向に折り直すと，フレキシブル基板が断線してしまう
恐れがあります。
恐れがあります。
Note 4: Refer to “Assembly-7: Notes on Assembling the Radiation
Plate (SY) (762) and Plate (Front) (762)” when assembling.
Note 4: 組立時は Assembly-7: Notes on Assembling the Radiation
Plate (SY) (762) and Plate (Front) (762) を参照してくださ
い。
い。
Click on the first or last page to see other NEX-3NL / NEX-3NY service manuals if exist.