Read Sony ILCE-QX1 / ILCE-QX1L Service Manual online
ILCE-QX1/QX1L
3-3
– ENGLISH –
3-3. DISCHARGING OF THE FLASH CAPACITOR
The charging capacitor for the flash has been charged at high voltage.
Therefore, there is a possibility of an electric shock if you directly handle this capacitor.
The high-voltage charge will not be discharged by simply turning off the unit’s power.
Make sure any remaining voltage is discharged by short-circuiting the flash capacitor with a Short Jig.
Therefore, there is a possibility of an electric shock if you directly handle this capacitor.
The high-voltage charge will not be discharged by simply turning off the unit’s power.
Make sure any remaining voltage is discharged by short-circuiting the flash capacitor with a Short Jig.
Preparing the Short Jig
Make a Short Jig by connecting a small clip to each lead of a resistor with a rated value of approximately 1 kΩ /1 W.
In order to prevent an electric shock, wrap insulating tape completely around the resistor and its leads.
In order to prevent an electric shock, wrap insulating tape completely around the resistor and its leads.
Resistor with a rated value of approximately
1 k
1 k
Ω/1 W (Part No. 1-215-869-11).
Wrap insulating tape completely
around the resistor and its leads.
around the resistor and its leads.
Small clip
Small clip
3-4. CHECKING THE Wi-Fi FUNCTION
Perform the following procedure to check the Wi-Fi function.
Required equipment: Windows personal computer with Wi-Fi interface
1. Turn on the power of the unit.
2. Check the SSID and password by following procedure.
2. Check the SSID and password by following procedure.
Procedure 1: Check the label on the inside of the battery lid.
Procedure 2: Check the seal on the cover of the manual.
Procedure 3: Connect the unit and a PC with the micro USB cable, then select [Computer] → [PMHOME] → “WIFI_INF.TXT” of
Procedure 2: Check the seal on the cover of the manual.
Procedure 3: Connect the unit and a PC with the micro USB cable, then select [Computer] → [PMHOME] → “WIFI_INF.TXT” of
[INFO].
3. Confirm on the PC that the unit is detected as a connectable wireless network.
4. To further confirm that the unit is connectable, connect the unit to the PC and select “Network and Internet” → “Manage Wireless Networks”
4. To further confirm that the unit is connectable, connect the unit to the PC and select “Network and Internet” → “Manage Wireless Networks”
from Control Panel to open the network connection list. The unit is included in the list.
DIRECT-xxxx:ILCE-xxx
Click on the first or last page to see other ILCE-QX1 / ILCE-QX1L service manuals if exist.